Download Print this page

Dunelm WOOD EFFECT VENETIAN BLIND Fitting Instructions

Advertisement

Quick Links

DUNELM WOOD EFFECT VENETIAN BLIND
24mm
24mm
48mm 30mm
42mm
60mm
30mm
Should any component be missing, please call the Customer Care Department on
DO NOT over reach. Always move the step ladder so that you are in a safe working position.
Take care when using power tools, use of a Residual Current Device (RCD) is recommended.
Always use eye protection when drilling. Beware of hidden pipe runs and cables.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled product.
PLEASE KEEP OUT OF THE REACH OF YOUNG CHILDREN. SMALL PARTS - CHOKING HAZARD
PLEASE KEEP THESE INSTRUCTIONS AND THE BATCH CODE ON THE PACKAGING FOR FUTURE
Fitting Instructions
Please keep for future reference
24mm
24mm
9mm
33mm
60mm
30mm
Young children can be strangled by loops in pull cords, chains,
tapes and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the
reach of young children.
Cords may become wrapped around a child's neck.
Move beds, cots and furniture away from window covering cords.
Do not tie cords together.
Make sure cords do not twist and create a loop.
PERSONS IN CHARGE OF CHILDREN ARE ULTIMATELY
RESPONSIBLE FOR FOLLOWING THE SAFETY INSTRUCTIONS
PROVIDED BY THE MANUFACTURER AND TO USE ANY SAFETY
DEVICE SUPPLIED.
The installation can be completed by non-professionals.
Intermediate support(s) (number dependant on blind width)
Safety Recommendation
Always use a step ladder when working at heights.
DO NOT hold or lean on the blind to support your weight.
We recommend you use two people for installation of larger blinds.
REFERENCE IN CASE OF ANY QUERIES
Tools required
24mm
48mm
60mm
42mm
42mm
WARNING
Pack Contents
Blind
End brackets
Hold down brackets
Valance with fixings
Fittings pack
Tilt wand
Cleats
01543 272605.
Optional
9mm
9mm
9mm
48mm
48mm
33mm
48mm
42mm
42mm
9mm
33mm
33mm
33mm
48mm
42mm
42mm
7332L--13
4

Advertisement

loading
Need help?

Need help?

Do you have a question about the WOOD EFFECT VENETIAN BLIND and is the answer not in the manual?

Questions and answers

Summary of Contents for Dunelm WOOD EFFECT VENETIAN BLIND

  • Page 1 DUNELM WOOD EFFECT VENETIAN BLIND Fitting Instructions Please keep for future reference Tools required Optional 24mm 24mm 24mm 24mm 24mm 48mm 30mm 33mm 48mm 48mm 48mm 33mm 48mm 33mm 33mm 33mm 48mm 42mm 60mm 60mm 60mm 42mm 42mm 42mm 42mm...
  • Page 2 4, 5 Please note: These blinds are not suitable for use in rooms where the temperature exceeds 50°C for a sustained period. Please read these instructions carefully and check the contents of the pack before attempting to assemble and fit this product. Note: Use the correct wall plugs and screws for the type of wall to which you are mounting your blind and cleat.
  • Page 3 Positioning the cord stops and reducing the slat stack at the bottom 1. The cord-stops are preinstalled 2.5-5cm from the headrail, they need to be loosened (but do not untie them) and moved Reducing the blind width s and screws for the type of wall to which you are mounting your blind down the cord by hand before you can lower the blind (fig.13).
  • Page 4 Installation of the hold down brackets (optional) These parts can be installed in order to stop the blind moving when the window is open in windy conditions. 1. Lower the blind and mark the position of the hold down brackets at each side. Screw the brackets into position using Wall fix Side fix the short screws (fig.20).