Flexispot ErgoKid SD02+ Installation Manual

Item No.: ErgoKid SD02+(B)
Max:10KG
STEP1 Install the supporting metal plate, shelf panel and Supporting cover
A
x4
2
B
x4
E
4x4
F
5x5
E
3
Connect the supporting metal plate(3) to the shelf panel(2)
with screw(A), and tighten it with 4*4 allen key(E)
STEP2
Install the decorative cover
Press the decorative cover (6) into the hole of the lower shelf set(2)
A(M5x12mm) C(M4x8mm) D(3x3)
B(ST4.2*16mm)
4pcs 4pcs 4pcs 1pc
1.Shelf SetX1 2.Lower Shelf SetX1 3.Supporting
metal plateX2
5.Upper Shelf 6.Decorative 7.Plastic Blockx4
PanelX1 CoverX2
8.CushionX2 9.Briquettingx2
A
4
1
Place the shelf panel (1) on the supporting sheet
metal(3) from top to bottom, and then buckle into
the supporting cover(4), using screw(B) to tighten it
with 5*5 wrench (F)
Press into
6
STEP3
C
1
x4
E(4x4) F(5x5)
1pc 1pc
F D
5x5 5x5
4.Supporting coverX2
Anti-tip setx1
2
F
Insert
B
3
Install the plastic block and upper shelf panel
2
Fix the plastic block(7) on the shelf (2) with screws (C),
and tighten it with a 5x5 wrench (F)
7
5
7
Insert the upper frame (5) into the groove of the
plastic block (7)
7
Buckle into
5
Buckle the plastic block (7) into the upper frame (5) and fix it
with screws (C), then to tighten it with a 5x5 wrench (F)
2
Place the plastic block
slot face up
7
C
F
7
C
F