RAZER HAMMERHEAD TRUE WIRELESS PRO Manual

INTRODUCTION

Enjoy true audio freedom and a pure, uninterrupted listening experience with the most advanced earbuds we've ever created. Sporting a 60ms low latency connection and hybrid active noise cancelation, focusing on your games, music and videos has never been this absolute.

WHAT'S INSIDE/WHAT'S NEEDED

WHAT'S INSIDE

• Razer Hammerhead True Wireless Pro earbuds
  
• Charging case
  
• Charging cable RAZER
  
• Additional silicone ear-tips in 3 sizes (S, M, L)
  
• Comply^TM foam tips (M)

WHAT'S NEEDED

• Devices with Bluetooth audio capability
• Internet connection for app installation

LET'S GET YOU COVERED

You've got a great device in your hands, complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com

TECHNICAL SPECIFICATIONS

• Frequency Response: 20 Hz - 20 kHz
• Impedance: 16 Ohm
• Sensitivity: 118dB
• Input power: 3 mw
• Driver size — Diameters: 10mm
• Connection type: Bluetooth connection
• Microphone Frequency Response: 100 Hz -10 kHz
• Microphone Pick Up Pattern: Omni-directional
• Microphone Signal-to-Noise Ratio: 64dB
• Microphone Sensitivity: -26dBFS
• Compatibility: Devices with Bluetooth audio capability
• Smartphone app: Available for Android and iOS
• Supported codecs: SBC,AAC

GETTING STARTED

CHARGING YOUR RAZER HAMMERHEAD TRUE WIRELESS PRO

For first time use, connect the charging case to a USB port using the charging cable without removing the earbuds. For subsequent use, the charging case and the earbuds can be charged independently.

Wait until your Razer Hammerhead True Wireless Pro is fully charged.

BATTERY INDICATOR FOR THE CHARGING CASE

When Plugged In

	Status
Static red	Charging
Static green	Fully charged

When Unplugged

	Status
Static green	Battery full
Static orange	Battery low
Blinking red	Battery critical

PAIRING TO A MOBILE DEVICE

When trying to connect your Razer product, remember to keep it within 1 meter of your mobile device.

1. While inside the charging case, simply open the lid to enter pairing mode.
   
2. Enable Bluetooth on your mobile device and select Razer Hammerhead TWS Pro from the list of devices found.
   
3. Wait for pairing to complete. You will hear an audio prompt when the earbuds have successfully paired and connected to your device.
   

If the earbuds fail to connect to your audio source, the earbuds will stay in search mode then power off after 3 minutes. If this happens, simply repeat the steps again to pair.
Once the earbuds have been paired, it will automatically try to connect to that paired mobile device every time the charging case's lid is opened, or the earbuds are powered on Your earbuds can only connect to one mobile device at a time.

USING YOUR EARBUDS

GAMING MODE

While connected, triple tap then hold the last tap for at least 2 seconds on any earbud to activate gaming mode. Once enabled, your earbuds will function at a lower latency; giving you real-time audio feedback while gaming. Repeat the same gesture to disable gaming mode.

For best performance, it is recommended to keep your earbuds within a very close distance of the audio source.

ACTIVE NOISE CANCELATION (ANC)/QUICK ATTENTION MODE

Active Noise Cancelation helps eliminate background noise while Quick Attention Mode allows you to hear your surroundings without needing to remove the earbuds. While connected, tap and hold on any earbud for at least 2 seconds to activate ANC and repeat to activate Quick Attention Mode. Doing the same gesture for the third time will deactivate both functions.

An audio prompt will notify vou when ANC and/or Quick Attention Mode have been enabled or disabled.

USING THE SILICON EAR-TIPS

The silicon ear-tips offer increased comfort, sound isolation, and security. Various size options let you achieve a comfortable and secure fit that effectively reduces unwanted noise.

Due to the different ear canal sizes of individuals, it's recommended to interchange the ear-tips to a larger or smaller size to improve comfort and sound quality and achieve a proper seal.

POWER ON/OFF

To power off the device, simply place the earbuds back inside the charging case and close the lid. Opening the lid if they are in the charging case will power them on.

If the earbuds are left idle outside the charging case for a few minutes, you will hear an audio prompt and then the earbuds will power off.

Tap and hold the function button on each earbud for at least 2 seconds to power them on again. You will hear an audio prompt from each earbud once they are powered on.

FUNCTION BUTTON QUICK REFERENCE

The following functions are only available when the earbuds are paired to a mobile device.

RAZER AUDIO APP

Making advanced customization just got a whole lot easier for your Razer Hammerhead True Wireless Pro earbuds. With the Razer Audio app, learn all its gestures, select from predefined EQs or customize one as needed, remap what each tap or gesture function does and much more — anytime, anywhere.

SAFETY AND MAINTENANCE

SAFETY GUIDELINES

In order to achieve maximum safety while using your Razer Hammerhead True Wireless Pro, we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C (104°F).Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activities that requires active awareness of your surroundings.
Listening to excessively loud volumes over extended periods of time can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.

MAINTENANCE AND USE

The Razer Hammerhead True Wireless Pro requires minimum maintenance to keep it in optimum condition. Once a month we recommend you clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.

Got a question? Ask the Razer Support Team at support.razer.com