Stark VARG Manual

STATUS LED DESCRIPTION

HOW TO TURN ON

While the bike is in Standby or Off modes:

• Press and hold the Power button on the control switch until LED lights up.

If successful, LED will be flashing fast green , yellow or magenta .

HOW TO TURN OFF

While the bike is in Neutral , Engaged or Update available modes:

• Press and hold the Power button on the control switch until LED lights up red .

If successful, LED will slow flashing red (every 3 seconds)

HOW TO ENGAGE

While the bike is in Neutral mode:

• Press the - button.

If successful, LED will be static green .

HOW TO DISENGAGE

While the bike is in Engaged mode:

• Press and hold the Power button on the control switch until LED lights up blue .

If successful, LED will be fast flashing green .

HOW TO HARD SHUTDOWN

While the bike is in Standby mode:

• Press and hold the + and - buttons until the LED lights up white .

If successful, LED will be completely Off.

HOW TO START THE SOFTWARE UPDATE

While the bike is On and flashing Update available mode:

• Press and hold the + button followed by the - until the LED lights up static blue .

If successful, the LED will be flashing multicolors and the bike will go into Standby mode once completed.

HOW TO CHARGE THE PRODUCT

While the bike is in Standby , Neutral or Engaged modes:

• Connect the charger cable to the bike's charging port.

If successful, LED will be static blue .

While the bike is in Off mode:

1. Connect the charger cable to the bike's charging port.
2. Press and hold the Power button until the LED lights up static blue .

If successful, LED will be static blue .

HOW TO CHARGE THE PRODUCT WITH ACTIVE COOLING SYSTEM

While the bike is in Standby , Neutral or Engaged modes:

1. Connect the charger cable to the bike's charging port.
2. Press + until the LED lights up static blue .

If successful, LED will be static blue .

While the bike is in Off mode:

1. Connect the charger cable to the bike's charging port.
2. Press and hold the Power button until the LED lights up static blue .
3. Press + until the LED lights up static blue .

If successful, LED will be static blue .

starkfuture.com

Documents / Resources

References

• Stark Future

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Stark VARG Manual