PROTON X90 Manual

Foreword

Before your first use, please read this manual carefully to help you understand the proper operation methods of this product for safe use and better entertainment experience! Please read this manual in detail before you start operating this multimedia and navigation device. Perusahaan Otomobil Nasional Sdn. Bhd. reserves the right of final interpretation of this manual. Important safety considerations:

1. The drivers are prohibited from watching programs and operating the device while driving to avoid traffic violations and accidents.
2. Do not disassemble or repair the device without permission to avoid damaging the device and accidents.
3. Since the product is subject to upgrade, this manual may have discrepancies from the actual operations. Please operate as per the actual conditions.
4. The operating voltage of this product is 9V ~ 16V. The product will restart for self protection when the battery voltage is low.

This vehicle has comply to MCMC requirements. The shown label is the certification mark approved for compliance to standards according to the Communications and Multimedia (Technical Standards) Regulations 2000.
www.proton-edar.com.my (1-800-888-398)

OTA Software Update
Click Settings → System → Software Update: You can check the available new version for updating.

Note: During the update, keep the engine running. Power failure may cause the system update to fail. If the system cannot start normally, please contact PROTON authorised service center.

Wi-Fi
Click Settings → System → Wi-Fi: The WLAN switch can be set to ON/OFF. Enable Wi-Fi and choose from a selection of available Wi-Fi networks. In prompted popup, type in the network password and press connect.

Bluetooth
Click Settings → System → Bluetooth: The Bluetooth device name of the IHU can be customize. Only letters, numbers and underline are supported for name change. Open the Bluetooth switch, search the available devices to pair with a selection of available mobile devices.

The selected mobile devices will receive pairing notifications requesting to confirm the pairing process.
Android : Click "Sync to Contacts" while connecting.
IPhone : Ensure "Sync to Contacts" function enabled.
If "Sync to Contacts" fails, click the device name to un-pair and attempt to reconnect the device.

Personal Hotspot
Click Settings → System → Personal Hotspot: The IHU is capable of sharing its internet data by enabling Personal Hotspot.
Select [Network Name] to rename the name of the IHU hotspot. Select [Hotspot Password] to edit the password of the IHU hotspot. Open the hotspot switch, the phone can search the wifi, then you can connect it through your phone.

System Message
Click Settings → System → System Message: To look the system message, including the storage, version information and reset factory settings.

Navigation

Starting the Navigation System
After starting up, click [Navigation] or say "Open Navigation" to voice command to open the navigation system.

Main Interface Introduction
Free Navigation Interface
The navigation system is divided into two navigation modes which are the Free Navigation and Route Navigation:

• After you enter the navigation system, if you do not set any destination navigation, it is free navigation.
• After you enter the navigation system, set the destination first, and then the system starts the route calculation and navigation according to the destination you set, which is route navigation.

The following describes the navigation screens and related functions:

Screen description:

1. Mode switch: Click to switch between 2D front up, 2D due North up and 3D front up modes.
2. Road condition: Switch on and off real-time live traffic.
3. Scale bar zoom: the current scale bar, you can change the scale bar size by "+" and "-".
4. GPS signal status: GPS signal has three statuses: Good; Weak; None.
5. Destination: Search for a destination (you can enter a keyword or search for nearby dining, accommodation, shopping, entertainment, life, and other facilities).
   

6. Vehicle logo: your current location and the orientation of the front of the car. When moving in the free navigation screen, the following will appear:
   

7. Navigation settings: Click to enter the settings interface, favorites, map data reporting and other interfaces.
   

Route Navigation Interface

On the route navigation screen, touch anywhere on the map to enter route navigation touch screen, which will display the following operation buttons.

Screen description:

1. Full route browsing: Enter full route browsing mode; click "Overview", to display all routes on the map.
2. Exit navigation: Click to stop navigation and re-plan route.
3. "..." button: The menu shows four action buttons. Refer to the following pictures and description when selecting this button.
   

1. Along the route: Search for nearby amenities such as parking lots and coffee shops. The facility result of the query can be set as a waypoint.
   

2. Route Edit: Edit the current Route, such as adding, deleting or changing the routes and adjusting the sequence of routes.
   
3. Turn by turn: View all turn information of the current route.
   
4. Settings: Click to enter the settings screen.

Search Location
Keyword Search
Click the position of "Search main screen" to perform keyword search. You can enter keywords such as "hotel" to display the search results.

Online Map Data Update
Prerequisites: When the map data used in the current navigation is very old (approximately two years), an online full map data update will be triggered when launching the navigation. Start the navigation. The navigation will check whether the current map version is over two years old in the background. If it is more than two years, the following page will pop up to guide the user to update the map database online.

VR Voice

Voice Introduction
Voice assistant can help users reduce their dependence on hand and eye inputs for the operation of in-car devices and functions. This improves driving concentration and overall safety. The voice assistant is designed to offer a smart, seamless and humanized experience for users interacting with the IHU.

Common Voice Interaction
Voice Wake up
[WAKE UP]

• Wake up word:" Hi, Proton".
• Press VR button on steering wheel to wake up.
• Click Voice assistant icon at left corner of navigation bar.

[EXIT]

• Exit Voice: "Exit"/"Cancel".
• Press VR button on steering wheel to exit.
• Click "x" icon on voice interaction interface.

Voice Control Navigation
Once Voice wakes up, common voice commands that can be used for navigation are as below:

• "Open map."
• "Navigate to 'KLCC'."
• "Stop navigation."
• "I want to park."

• "Go to office."
• "Search gas station along the route."
• "Where am I?"
• "Zoom in."

Voice control can also be used to check road conditions, access map controls, check remaining time to the destination and for other navigation-related queries. Navigation voice commands and their corresponding functions are not limited to the examples above. The IHU is able to interpret other common phrases with clear instructions.

Voice Control Calls
After Voice wakes up, common voice commands that can be used for calls are as below:

• "Make a call."
• "Dial 'Rick'."
• "Call '911'."*
• "Call 'police'."
• "Call 'fire station'."
• "Call 'Yes'."
• "Call back."
• "Open Bluetooth phone."
• "Show contact book."
• "Show call log. "

Phone call voice commands and their corresponding functions are not limited to the examples above. The IHU is able to interpret other common phrases with clear instructions.

Voice Control Audio
After Voice wakes up, common voice commands that can be used for music and radio interaction are as below:

• "Play 'Lonely'."
• "Play 'Taylor's' song."
• "Play 'Rain On Me by Lady Gaga'."
• "Play my favorites."
• "Save this song."
• "Single loop."
• "Pause song."
• "Play music."
• "Previous song."
• "What song?"
• "Play FM 92.9."
• "Turn to 'Hot FM'."
• "Add to favorite list."
• "Next station."

Audio voice commands and their corresponding functions are not limited to the examples above. The IHU is able to interpret other common phrases with clear instructions.

Voice Control System
After Voice wakes up, common voice commands that can be used for volume control, brightness, settings and applications are as below:

• "Volume up."
• "Mute."
• "Make the screen brighter."
• "Home page."

• "Turn on Wi-Fi."
• "Turn on Bluetooth."
• "Open video."
• "Turn on hot spot."
• "Open Weather application."
• "Open VR Setting."
• "Open Display Setting."
• "Turn off Bluetooth."

System voice commands and their corresponding functions are not limited to the examples above. The IHU is able to interpret other common phrases with clear instructions.

Voice Control Vehicle
After Voice wakes up, common voice commands that can be used for AC and window controls as below:

• "Play 'Lonely'."
• "Turn on AC."
• "Set temperature to level 5."
• "Increase the temperature."
• "Maximum temperature."
• "I am cold."
• " Turn on defrost."
• " Rear window defrost off."
• " Turn on fresh mode."
• "Increase fan speed."
• "Set fan level to 5."
• "Medium fan."
• "Open window."
• "Front window open."

Vehicle voice commands and their corresponding functions are not limited to the examples above. The IHU is able to interpret other common phrases with clear instructions.

Voice Control Inquiry
After Voice wakes up, common voice commands that can be used for general inquiries are as below:

• "How is the weather today?"
• "Can I wash my car tomorrow in Kuala Lumpur?"
• "Will it rain tomorrow in Kuala Lumpur?"
• "What's date today?"
• "What's time now?"
• "What can you do?"
• "Who are you?"

Inquiry voice commands and their corresponding functions are not limited to the examples above. The IHU is able to interpret other common phrases with clear instructions.

Multimedia

Radio

1. Switch between FM and AM.
2. Seek radio stations via scan.
3. Previous station: automatically search for the last available radio station and play.
4. Pause Radio: pause or play the radio station.
5. Next station: automatically search for the last available radio station and play.
6. Rebroadcast: Second rebroadcast from the current frequency, click this icon to seek the next station in the direction of +, play 5s, and continue to seek in the direction of + repeatedly, until it is returned to the starting frequency of SCAN.
7. Adding radio stations to favorites.
8. Favourite list of radio stations
9. Display radio station frequency and name (RDC)*.

USB and Bluetooth Music
Audio files supported based on the following formats: MP3, WMA, AAC, WAV, OGG, FLAC. Music files stored in USB flash drives can be read and played via the audio app in the IHU. Music and audio from a mobile phone can be played via Bluetooth connection with the IHU.

Browse songs in the USB flash drive by Folder, Artist, Album and All.

IHU supports playing music chosen as favorites.

Photos and Videos
The IHU supports the following image file formats: *.JPG, *.JEPG, *.PNG, *.GIF (static), and *.BMP. In the format of *. GIF, the first image in the truncated sequence is displayed.
Images stored in USB flash drives can be viewed and displayed from the photo app. The images will be rearranged according to the respective folders.

Chosen image or video will be displayed in full screen. During the display, there will be an option to go to the previous or next image or next video as well as to rotate the image orientation.

Video files in the following formats are supported: 3GP, FLV, MKV, MP4, AVI, MOV.
The following video encoding formats are supported: MPEG, MPEG2, MPEG4, AVC, XVID, MJPEG.
Videos stored in USB flash drives can be viewed and displayed on the IHU. The videos will be rearranged according to the respective folders.

Please be aware that the IHU will not allow videos to be played while the vehicle is moving. Hence, the following reminder will be displayed if it was found that the vehicle is currently in drive mode.

A-Store

A-Store allows users to download preferred applications to be installed on the IHU. The A-Store provides a variety of software such as basic apps, music, weather, themes, and other relevant software and services provided by various partners for the users to download.

The A-Store supports search inputs. Individual apps can be downloaded, updated, installed, and deleted.

Phone

Bluetooth Connection
Click [Settings] --> [Connect] --> [Bluetooth Switch] Enable Bluetooth, and turn on Bluetooth on mobile phone. Click [Available Devices] to search for available devices to be paired to the IHU.


Then the mobile phone will receive pairing notification.
Android: Click "Sync to Contacts" while connecting.
iPhone: Ensure "Sync to Contacts" function is enabled.
If "Sync to Contacts" fails, please click the device name to unpaired it and reconnect the device again.

Dialing
Various methods of making a call using the IHU are as follows:

1. Call via keypad.
   

2. Call via contacts.
   
3. Call via recent calls.
   
4. Call via VR Voice. After awakening the VR Voice, calls can be made via the voice command.

Answering and Hanging Up
Answering and hanging up calls can be done via multi-function control buttons at the steering wheel. To answer and hang up via Voice without awakening the VR, please see Section - VR Voice for voice commands.

Theme

Switch Theme
Click [Theme APP] --> [Theme] Choose from a selection of themes and switch between them for more personalization options according to user preferences.

Switch Wallpaper
Click [Theme APP] --> [Wallpaper] Choose from the selected wallpapers and switch more personalized options between them according on user preferences.

Switch Screensaver
Click [Theme APP] --> [Screensaver clock] Switch to preferred screen saver and set screensaver for the screen lock page.

Member Centre

The Member Center offers easy access to vehicle information and user account management. It features a variety of services that create a seamless driving experience. The user can access the Member Center using a guest account or by logging in with phone number and password. The PROTON Link application with the associated account linked to the vehicle upon purchase can also be used to scan the QR code displayed on the IHU to login.

After logging in, users can view their account information such as Nickname and Profile Picture. Internet data and purchased data can also be viewed in the Member Center.

PROTON Link App Centre

PROTON Link Mobile App
Download
Please download "PROTON Link" app in application market. For iOS mobile phone, please search for "PROTON Link" in the Apple App Store. For Android mobile phone, please search for "PROTON Link" in the Google Play Store. For HuaWei mobile phone, please search for "PROTON Link" in the AppGallery.

Creating new account

1. Open the PROTON Link App, press "Sign up", and enter the mobile phone number that you filled in during the first registration of this vehicle.
2. Set the login password to complete the account registration. When you log in for the first time, your vehicle list will appear automatically.
   The earliest purchased Proton vehicle will be the default vehicle in case you purchase multiple Proton vehicles.
   
   After the account is created, the PROTON Link service is turned on. When you have multiple Proton vehicles, you can switch models by selecting on the vehicle you prefer.
   

Home Page

Press "Add Reg. No." in (the red box) to enter the vehicle detail page, add the vehicle information and press Save to return to home page.

The home page shows weather information, vehicle status, dashboard and internet data usage information.

Notification

Press "Control" icon at the upper left corner of the page to view the vehicle remote control execution results, alert information, advertisements and other types of messages.

Dashboard

Slide up the home page to view dashboard information, total range, total mileage, average fuel consumption, average speed, oil pressure and electric parking brake (EPB) status.

Slide up further for vehicle internet data usage information.

Remote Control

1. You are required to activate the PIN code settings. this 4 Digit PIN code will be used to operate remote control feature.
2. Subject to Mobile Network coverage and security purpose, this operation may take time.
3. You are advised to be close to the vehicle when performing this operation. this is to avoid the door being opened by intruder.

	Press this icon to enter the remote control page.
	Press and hold this icon to lock the doors.
	Press and hold this icon to unlock the doors.
	Press and hold this icon to open or partially open the windows.
	Press and hold this icon to close the windows.
	Press and hold this icon for ventilation.
	Press and hold this icon to sound the horn.
	Press and hold this icon to unlock the tailgate*. If the tailgate is not opened within 30 seconds. it will be locked again
	Press and hold this icon to start engine.
	Press and hold this icon to turn on AC.
	Press and hold this icon to turn off AC.

Map

	Press this icon to enter the map interface.
	Press this icon to show your current location. Your location will be shown on the map.
	Press this icon to show your current vehicle location. Your vehicle location will be shownon the map.
	Press this icon to show the list of favourite locations that you have previously saved. The favourite location will be shown on the map if the location is selected.
	Press this icon to set the fence range.

POI Search

1. Press the search bar above the map to enter the search interface.
2. Press keywords in the search bar to find the destination you are interested in.
3. Press on the POI icon to see the points of interest you want to go. For example, press on "Petrol Station" and the map will show the fuel stations within 5 km.

Select a location by pressing your finger on the map to set your destination. A banner will pop up as follows:

	Press this icon to send the target destination to the navigation system in the vehicle.
	Press this icon to use the navigation on your phone to get to the destination.
	Press this icon to save the address to your favorites list.

Geo-fence
Press icon at your map interface of your phone to set the fence range. When the vehicle exits or enters the set range, it will send a notification to your mobile phone to remind you.

About "My Account"
Press icon to enter your exclusive page.

My account
My account page can be edited to change personal information. You can view vehicle information, driving logs and other information in the list.

Trip Log

1. Press "Trip Log" to view your recent travel history.
   
2. Press "Time selection" to query the time range of the trip log.
   

Call Service
Note: In order to use this function, you need to set the contact number of your preferred service centre. Refer to topic "My service centre". In the "Call for service" column, press the shown phone number to call your preferred service centre.

My Service Centre
Press "Preferred service centre" to enter the setting page.
The preferred service centre by default is the service centre where you purchased the vehicle, which can be customized and modified later.

Settings

1. Press the "Trip log function" switch to enable or disable the trip log function.
2. Press "Preferred Service Centre" to customize and modify the details of your preferred service centre.
3. Press "Change password" to modify your login password.
4. Press "Language" and select the type of language you need.
5. Press "About PROTON Link" to view the current version.