Setting Up The Channel List; Using Auto Setup - Sony BRAVIA KDL-32XBR950 Operating Instructions Manual

Setting Up the Channel List

Using Auto Setup

After you finish connecting your TV, you need to run Auto Setup, which
automatically set up available analog and digital channels. The Auto
Program screen appears when you turn on your TV for the first time after
hooking it up. If you do not want to set up the channels at this time, you can
do it later by selecting the Auto Program option in the Channel menu (see
page 110).
The Auto Setup feature does not apply for installations that use
a cable box for all channel selection.
To run Auto Setup the first time you turn on your TV
1
Press to turn on the TV.
POWER
The Initial Setup screen appears.
2
V v
Press or to select the on-screen display language. Then press
.
ENTER
The message "Start auto program now?" appears.
3
V v
Press or to select "Yes", then press
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To run Auto Setup again at a later time
s
Use the Auto Program feature as described on page 110.
To add individual digital channels
s
Use the Digital Channel feature as described on page 78.
Auto Program may take up to 30 minutes to complete. A
progress bar is displayed while the channel list is being
created.
.
ENTER
55