Subscribe to Our Youtube Channel
Related Manuals for Valor Fires Angharrad
Summary of Contents for Valor Fires Angharrad
- Page 1 5132662/03 INSTALLER AND OWNER GUIDE Model 800 Amaris, Angharrad and Xanthe Electric Suite (GC No. EF-032-36) (Suite may differ from that shown)
- Page 2 This guide is intended to help you install and care for your Valor Fires electric suite. Please read carefully before installing and using your suite. However, if further information is required, our Valor Fires Technical Helpline will be pleased to help.
-
Page 3: Customer Care
Page 2 Safety First. Valor Fires suites are CE Approved and designed to meet the appropriate British Standards and Safety Marks. Quality and Excellence. All Valor Fires suites are manufactured to the highest standards of quality and excellence and are manufactured under a BS EN ISO 9001 quality system accepted by the British Standards Institute. -
Page 4: Handling And Unpacking
All Valor Fires suites are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new suite, by providing simple and informative instructions to enable you to install it and to ensure that you benefit from the excellent performance and features it has to offer. - Page 5 ● Always use a fireguard when young children, infirm persons and pet animals can come into contact with the suite. ● Always use genuine Valor Fires spare parts. Never ● Never leave children unsupervised in a room where the suite is ON and unguarded.
- Page 6 ● The electric supply must be safely routed from the suite to an electrical socket. If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor Fires authorised service agent, or similarly qualified person. All external wiring between the suite and the electrical supply shall comply with current IEE regulations.
- Page 7 Amaris 1090 Figure 1. Suite dimensions (Suite may differ from that shown) Page 6 4. FITTING THE SUITE The installation of this suite requires a reasonable level of DIY skills. Please read this guide thoroughly before commencing installation and if in doubt, seek help from a competent person.
- Page 8 Bowl Fuel support Wall fixing bracket 35mm long (Design may differ wood from that shown) screw 15mm long Wall plug screw Figure 2. Contents (Suite, bowl and fuel support design may differ from that shown) 1. Place the wall fixing brackets as shown in figure 3.
- Page 9 Figure 3. Securing the suite (Bracket design may differ from that shown) Fitting the Bowl, Fuel support and pebbles. 1. Locate the hole in the base of the bowl over the three location points around the lamp (See figure Figure 4. (Suite and bowl design may differ from that shown)
- Page 10 2. Place the fuel support into the top of the bowl as in figure 3. Place the pebbles on top of the fuel support. It is not necessary to use all the pebbles supplied. Ensure that the pebbles or any of their edges do not enter the hole in the centre of the fuel support as this may prevent the spinner above the lamp from turning.
- Page 11 I have a problem with my suite! Important Safety Before undertaking maintenance or replacing the lamp always disconnect the suite from the electricity supply by removing the 3 pin plug and allowing the heater at the top of the suite to cool completely. 1.
- Page 12 For general advice about your suite: VALOR FIRES TECHNICAL 0844 8711 565. HELPLINE CALLERS IN THE REPUBLIC OF IRELAND Call 0044 844 8711 565. 7. ENVIRONMENT What should I do when I'm ready to dispose of my suite? The plug should be removed from the mains supply cable and the mains supply cable cut from the suite.
- Page 13 If you experience a fault with your new suite, we aim to provide a safe and high quality repair service supported by our dedicated national network of highly skilled engineers. Nothing in this warranty will affect your statutory rights. What you need to do if you experience a problem with the operation of the suite; Read section 5 of this guide "Cleaning and maintaining the suite".
- Page 14 Page 14 To be completed by the customer: Model Serial number (Can be found on the information label - See figure Figure 5. Information label location...
- Page 15 A LABEL CONTAINING THE SERIAL NUMBER MAY HAVE BEEN PLACED INSIDE THIS BOX. Suite name - Can be found on the information label (Block Capitals) Brand (Please tick) Date of Installation D D M M Y Y Page 15 Page 16...
Need help?
Do you have a question about the Angharrad and is the answer not in the manual?
Questions and answers