Download Print this page

Advertisement

Quick Links

5134318/02
INSTALLATION GUIDE
Clarissa
Surround
The surround is supplied
fitted with infill strips (gas
rails), with these fitted the
surround is designed for a
back panel that has a
maximum depth of 25mm.
With the infill strips
removed the rebate at the
back of the surround is
75mm.
This guide should be read in conjunction with the installer and owner guide
supplied with the fire / heater.
This guide is intended to help you install your surround. Please read carefully before
installing. However, if further information is required, our
Valor Fires Technical Helpline will be pleased to help.
Telephone 0844 8711 565 (National call rates apply in the United Kingdom)
In the Republic of Ireland call 0044 844 8711 565.
Important: Please keep your guide in a safe place for future reference.
©
Baxi Heating U.K. Limited 2009.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Clarissa and is the answer not in the manual?

Questions and answers

Summary of Contents for Valor Fires Clarissa

  • Page 1 This guide is intended to help you install your surround. Please read carefully before installing. However, if further information is required, our Valor Fires Technical Helpline will be pleased to help. Telephone 0844 8711 565 (National call rates apply in the United Kingdom) In the Republic of Ireland call 0044 844 8711 565.
  • Page 2 Warning: Any person who does any unauthorised act in relation to a copyright work may be liable to criminal prosecution and civil claims for damages. Valor Fires, Erdington, Birmingham B24 9QP www.firesandstoves.co.uk Because our policy is one of constant development and improvement, details may vary slightly from...
  • Page 3: Handling And Unpacking

    INSTALLATION GUIDE SAFETY When drilling into brick work always wear safety goggles, a dust mask, and always work in a well ventilated area. Keep children clear of work area. Always read the installer and owner guide supplied with the fire / heater. This guide should be read in conjunction with those supplied with the fire / heater.
  • Page 4 INSTALLATION GUIDE CONTENTS Figure 1. Contents - (Items are not to scale. Any components extra to those above can be discarded). Page 4 © Baxi Heating U.K. Limited 2009.
  • Page 5 INSTALLATION GUIDE FITTING THE SURROUND The installation of this surround requires a reasonable level of DIY skills. Please read this guide thoroughly before commencing installation and if in doubt, seek help from a competent person. Do I need any tools? You will need the following tools: A Pozidrive / Phillips / cross head screwdriver.
  • Page 6 INSTALLATION GUIDE Step 2. Assembling the fascia to the surround top. Locate the fascia (C) onto the cam bolts in surround top (A) as in figure 3. Secure in place using three cam locks (D) as in figure 3. Figure 3. Page 6 ©...
  • Page 7 INSTALLATION GUIDE Step 3. Assembling the surround legs to the surround top. Locate the left leg (E) and right leg (F) onto the cam bolts in surround top (A) as in figure 4. Secure in place using two cam locks (D) as in figure 4. Figure 4.
  • Page 8 INSTALLATION GUIDE Step 4. Securing the fascia to the surround legs. Secure the fascia to the surround legs using eight screws (G). Figure 5. Step 5. Removing and preparing the infill strips (Gas rails) for installations with electric heaters. For installations with gas fires proceed to step 8. The surround is supplied for use with gas fire installations.
  • Page 9 INSTALLATION GUIDE Figure 7. Step 6. Fitting the infill strips to the wall. Measure and mark the back panel opening position onto the wall then place the back panel aside. We recommend that the strips are fitted to the wall approximately 50mm clear of the back panel opening (See figure 8).
  • Page 10 INSTALLATION GUIDE Step 7. Checking for gaps. Before continuing with the installation of the surround and back panel it is important to ensure that there are no gaps between the surround and back panel or surround and wall.To do this, place the back panel and surround in place.
  • Page 11 DO NOT use abrasive cleaners. DO NOT allow prolonged exposure to water. If you require further assistance, the Valor Fires Technical Helpline will be pleased to help. Please telephone 0844 8711 565 (local rates apply in the United Kingdom). In the Republic of Ireland please telephone 0044 844 8711 565.
  • Page 12 © Baxi Heating U.K. Limited 2009.