Programming The Order Of Playback; Checking Or Changing Programmed Tracks; Searching For And Storing The Radio Stations; Selecting A Stored Station - Samsung MM-C8 Instruction Manual

Programming the Order of Playback

(This function is not available during playback of an MP3-CD.)
B
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 24 order of tracks desired to listen
may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD
Repeat function.
In the case of the MP3-CD, the PROGRAM/SET button
may be used as the RESUME ON, OFF function.
1
If the CD function is selected, stop the player by pressing
2
Load the selected CD.
3
Press PROGRAM/SET.
Result: The following indications are displayed:
(01 = Program no., -- -- = Track no. on the disc)
4 Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
5 Press PROGRAM/SET to confirm your selection.
Result: The selection is stored and is displayed.
6
To select other tracks, repeat Steps 4 to 5.
7
Press MP3-CD/CD (√/») to listen to the track selection in the order pro-
grammed.
8
To... Press...
Listen to the current track again once
Listen to the previous track twice
Listen to the next track once
Skip forwards or backwards or the appropriate
one or more tracks number of times
9
To cancel the selection, press button.
Once if the compact disc player is stopped
Result: PROG is no longer displayed.
If you open the compartment, the selection is cancelled.
TUNER
TIMER/CLOCK TIMER ON/OFF
BAND
AUX 3,5
PROGRAM/SET COUNTER RESET
MO/ST
SURROUND XT
SLEEP REC./PAUSE
REV.MODE DISPLAY RDS PTY
CD/MP3-CD
1, 9
4,8
4,8
TUNING/
VOLUME 7
ALBUM
TUNING
14
Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press PROGRAM/SET button twice.
Result: The following indications are displayed:
button.
(01 = Program no., – – = Track no. on the disc)
If you have already programmed 24 tracks, Check is displayed
instead of CH when you press PROGRAM/SET.
3 Press PROGRAM/SET one or more times until the track to be
changed is displayed.
4 Press or to select a different track.
5
Press PROGRAM/SET to confirm your change.
6
Press MP3-CD/CD (√/») to start listening to the selection.
Result: The first track selected is played.
TUNER TIMER/CLOCK TIMER ON/OFF
BAND
2,3,5
AUX PROGRAM/SET COUNTER RESET
MO/ST
SLEEP REC./PAUSE SURROUND XT
REV.MODE DISPLAY RDS PTY
1
4 CD/MP3-CD
6
TUNING/
VOLUME
ALBUM
TUNING
REPEAT
MODE
+10
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing (
2 Select the required frequency band by pressing TUNER/BAND
again on the front panel or BAND on the remote control.
Result: The appropriate indication is displayed:
FM
MW
LW
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4 Select the station to be stored by:
Pressing
buttons on the remote control to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result: The PROG is displayed for a few seconds.
b Pressing
4
buttons on the remote control to assign a program number .
c Press PROGRAM/SET to store the radio station.
Result: PROG is no longer displayed and the station is stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
2
4 5

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing (
2
Select the required frequency band by pressing TUNER/BAND on
the front panel.
).
3
Select the radio station as follows.
To listen to ...
Stored station
Frequency Modulation
Medium Wave
Long Wave
Press TUNING MODE
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
1
or buttons on the front panel or or
3
or buttons.

Improving Radio Reception

or buttons on the front panel or or
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press MO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
3
4 5
TUNER TIMER/CLOCK TIMER ON/OFF
BAND
2
AUX PROGRAM/SET COUNTER RESET
MO/ST
5
SLEEP REC./PAUSE SOUND MODE
REV.MODE DISPLAY RDS PTY
CD/MP3-CD
TUNING/
4 5
VOLUME
ALBUM
TUNING
REPEAT MODE
4 5 +10
3
TA P E
GB
) .
Press ...
1. the TUNING MODE button until
"PRESET" is displayed.
2. or button to select the
required program.
2
3
3
MUTE
TUNER
TIMER/CLOCK TIMER ON/OFF
BAND
AUX
PROGRAM/SET COUNTER RESET
MO/ST
REC./PAUSE SURROUND XT
SLEEP
REV.MODE DISPLAY RDS PTY
CD/MP3-CD
15