Advertisement
Quick Links
Installation Guide
Verti Tri Wall Mount Bike Rack
Installation
- Locate center of bottom hole placement of the first wall rack
- Make a mark with pencil at approximately 1520mm from the floor to the
first mounting hole position
- Hold rack straight, center hole over mark position, and mark the upper
hole
- Remove rack and drill both holes
- Insert the screw bolts and secure in place
- The second rack will need to be offset by 300mm (see diagram) and a
500mm spacing between.
- Repeat above steps until all racks are installed, alternating the lower and
higher rack positions
www.classic-arch.com.au
Advertisement
Related Manuals for Classic Verti Tri Wall Mount Bike Rack
Summary of Contents for Classic Verti Tri Wall Mount Bike Rack
- Page 1 Installation Guide Verti Tri Wall Mount Bike Rack Installation - Locate center of bottom hole placement of the first wall rack - Make a mark with pencil at approximately 1520mm from the floor to the first mounting hole position - Hold rack straight, center hole over mark position, and mark the upper...
- Page 2 Installation Guide Verti Tri Wall Mount Bike Rack Layout Example of a compliant Bike Room Layout (side view), for further details please refer to Classic’s Bike Rack Compliance Guide or directly to the AS2890.3:2015 standard. www.classic-arch.com.au...
Need help?
Do you have a question about the Verti Tri Wall Mount Bike Rack and is the answer not in the manual?
Questions and answers