Listening To Radio; Presetting Stations - Samsung MAX-DVD9920 Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, MW, (SW1,2) broadcast stations) by
using either the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/
Tune in to the
BAND button.
desired station.
Automatic Tuning 1
•
The selection toggles back
and forth between "FM MW
(SW1,2)" each time the
Automatic Tuning 2
TUNER(BAND) button is
pressed.
Manual Tuning
increase or decrease the frequency incrementally.
Main Unit
Press the Function
1 2
Select a broadcast
button to select the
station.
desired band (FM,
MW,(SW1,2)).
Automatic Tuning 1
press
Knob to select the preset station.
Automatic Tuning 2
and hold
Knob to automatically search the band.
Manual Tuning
press
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
43
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
SLEEP DIMMER
DISC SKIP ZOOM SLOW
MONO/ST
REPEAT REMAIN SUB TITLE
DECK 1/2
Press button to select
TUNER TAPE AUX
the preset station.
BAND
Press and hold button to
automatically search the band.
VOLUME TUNING
SOUND TUNNER
MODE MEMORY
Briefly press button to
P.SCAN
AUDIO
STEP
Press the STOP ( ) button
TIMER/CLOCK CANCEL DIGEST
to select PRESET and then
TIMER ON/OFF LOGO SLIDE MODE
button or turn Multi Jog
NTSC/PAL
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog
Press STOP ( ) to select
MANUAL and then briefly
or turn Multi Jog Knob

Presetting Stations

You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1 2
TUNER(BAND) Press
button and select
select "89.10".
the FM band.
• •
Each time the button is pressed, Refer to Step 2 on page 41
the band switches between to automatically or manually
"FM MW (SW1,2)". tune in to a station.
MHz
kHz
4 Press to 5
Press the TUNER
select preset
MEMORY button.
number.
• •
You can select between 1 and Press the TUNER MEMORY button before
'PROGRAM' disappears from the display.
15.
•
'PROGRAM' disappears from the display
and the station is stored in memory.
PROGRAM
MHz
kHz
To tune in to a preset station, press
remote control to select a channel.
3
Press the TUNER
to
MEMORY button.
•
"PROGRAM" flashes in the
display.
PROGRAM
MHz
MHz
kHz
kHz
To preset another
6
station, repeat
steps 2 to 5.
MHz
kHz
on the
44