El.Mo AT22K Technical Manual

Technical manual
AT22K
NG-TRX wireless actuator with 2 × 5 A
relay outputs and 2 control inputs
1 DESCRIPTION
AT22K is a wireless actuator.
It features two relay outputs that can be independently
controlled.
Two wired inputs allow to control each one a specific output
even locally.
AT22K is suitable, in particular, to allow NG-TRX control units
to interact with shutter automation systems.
Output control can take place
• remotely, conveniently configuring the outputs and inte-
grating the device into e-Connect;
• locally, wiring switches (optional) to the actuator control
inputs.
Can be programmed using the BrowserOne software.
A LED indicator signals device status.
AT22K is compatible with devices that use the NG-TRX pro-
tocol, such as VIDOMO2K and GATEWAY2K.
Control unit
VILLEGGIO NG-TRX series
PREGIO series
PROXIMA series
Addressee for this information:
Firmware version
8.6.6 or above
3.0.2 or above
1.0.2 or above
User | Installer
2 VIEW OF THE DEVICE
5A 250VAC
5A 30VDC
1 2 3
A
OUTPUT 2 OUTPUT 1
F
A 5 A / 250 Vac / 30 Vdc relay output (terminals 1 - 2) *
B 5 A / 250 Vac / 30 Vdc relay output (terminals 3 - 4) *
C 230 Vac power terminals (terminals 5 - 6)
D Input wires for local control
E Learning button
F Antenna
* Maximum applied load 500VA.
1 1 1
E
L
230VAC
N
4 5 6
B C
D