Listening To Radio; Presetting Stations - Samsung MAX-DC20800 Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, (SW1,2),MW broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/ Tune in to the
BAND button. desired station.
Automatic Tuning 1
•
The selection toggles back
and forth between "FM
➝ ➝
(SW1,2) MW" each time
Automatic Tuning 2
the TUNER(BAND) button is
pressed.
Manual Tuning
increase or decrease the frequency incrementally.
Main Unit
Press the
TUNER/BAND
1 2
Select a broadcast
button to select the
station.
desired band (FM,
(SW1,2),MW).
Automatic Tuning 1
press
Knob to select the preset station.
Automatic Tuning 2
automatically search the band.
Manual Tuning
press
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
57
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press button to select
the preset station.
Press and hold button
to automatically search the band.
Briefly press button to
Press the STOP ( ) button
to select PRESET and then
button or turn Multi Jog
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
Press STOP ( ) to select
MANUAL and then briefly
or turn Multi Jog Knob

Presetting Stations

You can store up to:
15 FM stations
5 MW stations or 15 FM stations
5 SW1 stations
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1 2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
• •
Each time the button is pressed, Refer to Step 2 on page 41
the band switches between to automatically or manually
"FM ➝ (SW1,2) ➝MW".
tune in to a station.
kHz
MHz
4 5
Press to
Press the TUNER
select preset
MEMORY button.
number.
• •
You can select between 1 and Press the TUNER MEMORY button before
15. 'PROGRAM' disappears from the display.
•
'PROGRAM' disappears from the display
and the station is stored in memory.
PROGRAM
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
15AM stations
3
Press the TUNER
to
MEMORY button.
•
"PROGRAM" flashes in the
display.
PROGRAM
kHz kHz
MHz MHz
To preset another
6
station, repeat
steps 2 to 5.
Note
kHz
MHz
•
When listening AM/SW , (Dolby Pro Logic II)
button does not work.
on the
58