Download Print this page

XTM ROOFTOP TENT HARDTOP LIGHT Owner's Manual

Download this manual

210mm

ROOFTOP TENT HARDTOP

LIGHT XTM

297mm

Need help?

Do you have a question about the ROOFTOP TENT HARDTOP LIGHT XTM and is the answer not in the manual?

Page 1 210mm ROOFTOP TENT HARDTOP LIGHT XTM 297mm...
Page 2 210mm 210mm WARNING Not all roof racks can safely accommodate rooftop tents. Even if your roof rack can accommodate your rooftop tent you need to check the weight capacity of your vehicle from your vehicle manufacturer before installation. + Before using the rooftop tent for the first time, it is recommended to check all components have been included and you become familiar with the assembly of the rooftop tent by reading through the instructions first.
Page 3 Unpack the Aluminium RTT from the box, all components are stored inside the tent. M8 x 55 Bolt x 8 Mounting plate x 4 Bottom entrance Ladder bracket M8 Nyloc nut x 8 M8 Washer x 8 Slide the two ladder brackets into the slot on the base.Secure the screws with the Allen key provided.
Page 4 3. Insert the optional end caps to the end of the extrusions. 1. Pull up the handle to enable the tent to open fully. 2.The elastic helps keep the tent inside the housing. Slide the elastic strap down and place it around the tent base when setting up. 3.
Page 5 PLU: 691595 CODE: LM-LRTO1A-V4 Manufactured and packaged for SRGS PTY LTD ABN 23 113 230 050 6 Coulthards Avenue Strathpine QLD 4500, Australia MADE IN CHINA...