Advertisement
Quick Links
Advertisement
Related Manuals for XTM AWNING HUB
Summary of Contents for XTM AWNING HUB
- Page 1 AWNING HUB XTM Instruction Manual...
-
Page 2: Parts List
PARTS LIST Tent Awning Poles Steel Pegs Carry Bag Guy Ropes Straps Awning Pole Steel Peg Strap Guy Rope Carry Bag Tent... -
Page 3: Setup Instructions
SET UP INSTRUCTIONS Step 1 Ensure the ground is free from sharp objects, unfasten the tent and spread it out on the ground. Then peg down the floor. Step 2 Slide the roof pole out from both sides until you hear a "click" sound. Step 3 Stretch all four leg poles until you hear a "click"... - Page 4 Step 4 Fasten all floor adjustable webbings and peg down. Step 5 Fix the roof fly by using guy ropes and peg out away from the tent. Step 6 To assemble the awning use the steel poles and guy ropes provided. Peg down the guy ropes to secure the poles.
- Page 5 ADDITIONAL INSTRUCTIONS FOR FITTING TO AN XTM AWNING Step 1 The awning with channel slot (as picture) can be attached to awning hub. There is a keder connector above the front door. Step 2 First take the keder connector off awning hub, and insert the keder into channel slot.
- Page 6 Step 3 Then zip the zipper of keder connector and awning hub, attach all the adjustable webbing straps to awning poles. PLU: 616753 CODE: CL-AHUB Manufactured and Packaged for SRG PTY LTD ABN 23 113 230 050 6 Coulthards Avenue Strathpine QLD 4500 Australia...