Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Press FUNCTION on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DVD/CD
AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
DIGITAL IN
17
Optical Cable
(not supplied)
USB
DIGITAL IN
AUX 1
AUX 1
AUX 2
USB
FM
AM.
Connecting an External Analog Component
Analog signal components such as a VCR or TV.
Audio Cable
(not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
1
Connect Audio In on the Home Theater to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press FUNCTION on the remote control to select AUX 1 or AUX 2 input.
•
Each time the button is pressed, the selection changes as follows: DVD/CD
AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
DIGITAL IN
USB
DIGITAL IN
AUX 1
AUX 1
AUX 2
USB
FM
AM.
18
GB