Download Print this page
Whirlpool AFG 527/G Product Description Sheet
Whirlpool AFG 527/G Product Description Sheet

Whirlpool AFG 527/G Product Description Sheet

Advertisement

Quick Links

PRODUCT DESCRIPTION SHEET
Controls
1
1
2
3
1
2
3
4
The exact configuration of the controls may vary according to the model.
Notes:
For correct operation of the appliance and to allow the lid to open freely without damage,
leave at least 7 cm clearance at the sides and rear.
After installation, wait for at least two hours without moving the appliance before connecting
it to the power supply.
If the freezer is left empty for short periods, it is preferable not to switch it off.
Frost formation on the upper edges and interior walls of the appliance is a natural
phenomenon and will not affect the performance of the freezer.
D
GB
F NL E
P
1. Lid handle.
2. Lock.
3. Seal.
4. Separator.
5. Defrost water drain plug.
6. Control panel.
7. Motor compartment ventilation grille.
8. Upper edge.
1. Thermostat: Temperature adjustment.
2. Red LED: Indicates that the freezer
temperature is not sufficiently low.
3. Green LED: Illuminates when the appliance
is on.
4. Orange illuminated button: Fast freeze
function ON/OFF. The fast freeze function is
active when the orange LED in the button
is lit.
DK
I
GR
S
N
FIN
GB

Advertisement

loading
Need help?

Need help?

Do you have a question about the AFG 527/G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whirlpool AFG 527/G

  • Page 1 PRODUCT DESCRIPTION SHEET 1. Lid handle. 2. Lock. 3. Seal. 4. Separator. 5. Defrost water drain plug. 6. Control panel. 7. Motor compartment ventilation grille. 8. Upper edge. Controls 1. Thermostat: Temperature adjustment. 2. Red LED: Indicates that the freezer temperature is not sufficiently low.
  • Page 2 PRODUCT DESCRIPTION SHEET Switching on the freezer for the first time • There is no need to set the freezer temperature on the thermostat because the appliance is factory set for the recommended temperature of -18°C. • Plug in the appliance. •...