Instructions: Tv Power, Volume, And Tv Input - Samsung SIR-S4120R User Manual

Instructions
: TV Power, Volume, and TV Input
1. Go to the Remote Control Setup screen.
Press the DIRECTV button; then select "Messages & Setup," then Recorder & Phone
Setup, then Remote Control Setup. Choose which device/functions you want to
control:
TV power, volume, and
To Control:
mute
Remote Control–TV
Choose:
(power, volume, mute)
2. Select the brand of your device.
Using the UP/DOWN arrows, highlight the brand of the device you wish to control,
then press SELECT. (If you have been using a universal TV remote control, select
your TV or A/V receiver's brand, not the brand of the universal remote.) Next you'll
see a screen with four-digit codes.
3. Prepare the remote control.
Point the remote away from your DVR. Refer to the table below and determine which
two buttons to press to prepare the remote. Press and hold the buttons simultaneously
for about 5 seconds (until the red light at the end of the remote control lights up and
stays on when you release the buttons).
TV power, volume,
To Control:
and mute
TV PWR and
Press the:
DIRECTV buttons
I n s t r u c t i o n s : T V P o w e r , V o l u m e , a n d T V I n p u t
TV input A/V system power,
volume, and mute
Remote Control– Remote Control–
TV (TV Input) A/V Stereo Receiver
TV input A/V system power,
volume, and mute
TV Input and TV PWR and DIRECTV
DIRECTV buttons buttons
A/V system volume
and mute only
Remote Control–
A/V Stereo Receiver
A/V system volume
and mute only
MUTE and DIRECTV
buttons
7
111