Advertisement
Quick Links
TOILET ROLL HOLDER 1972
Ø310 mm
112 mm
N1972
O1972
N1972-BOC
BRUSHED
POLISHED
BRUSHED
STAINLESS
STAINLESS
COPPER
DESIGNED BY BØNNELYCKE MDD
PRODUCT DETAILS, TECHNICAL DETAILS
AND FITTING INSTRUCTIONS
128 mm
10 mm
MATERIAL: STAINLESS STEEL
AVAILABLE IN THE NINE FROST FINISHES:
N1972-C
N1972-BMG
POLISHED
BRUSHED
COPPER
GOLD
180 mm
125 mm
N1972-GO
N1972-BCB
N1972-B
POLISHED
BRUSHED
MATT
GOLD
BLACK
BLACK
N1972-W
MATT
WHITE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for FROST 1972
Summary of Contents for FROST 1972
- Page 1 DESIGNED BY BØNNELYCKE MDD PRODUCT DETAILS, TECHNICAL DETAILS AND FITTING INSTRUCTIONS 180 mm Ø310 mm 128 mm 125 mm 10 mm 112 mm MATERIAL: STAINLESS STEEL AVAILABLE IN THE NINE FROST FINISHES: N1972 O1972 N1972-BOC N1972-C N1972-BMG N1972-GO N1972-BCB N1972-B N1972-W...
- Page 2 MOUNTING Use the enclosed key to open the front lid. Ø6x30 Ø4x30 Place the dispenser in the desired position and mark the screw holes as illustrated. Drill the marked holes using a 6 mm drill bit and insert the enclosed Ø6x30 mm wall plugs ALL MEASUREMENTS ARE IN MILLIMETERS WWW.FROSTDENMARK.COM...
- Page 3 Use 2 of the enclosed 4x30 mm screws to secure the toilet roll holder to the wall using a PH2 bit. After securing, slide the toilet roll holder down and tighten the screws with the PH2 bit, as illustrated. Use the remaining 4 4x30 mm screws to fully secure the toilet roll holder to the wall.
- Page 4 EXCLUSION OF LIABILITY FROST accepts no liability whatsoever for damage to persons or property that occurs or has occurred as a result of improper installation or maintenance, particularly if the safety instructions and other points to note listed are not or have not been observed in full.
Need help?
Do you have a question about the 1972 and is the answer not in the manual?
Questions and answers