FROST NOVA2 CARE N1963 Fitting Instruction

Seat

NOVA2 CARE

SEAT

Fitting instruction

Montageanleitung

Monteringsvejledning

Monteringsvägledning

Montage hanleiding

Manuel de montage

Exclusion of liability

FROST accepts no liability whatsoever

for damage to persons or property that

occurs or has occurred as a result of

improper installation or maintenance,

particularly if the safety instructions

and other points to note listed are not

or have not been observed in full.

Warning and hazard notices

Improper mounting or use can lead to

accidents and serious injuries.

382,00

Before installing, the installer must ensure

that the material and strength of the wall are

su cient. FROST CARE products must be

Recommended installation height: 37 - 41 cm

If any other user height is required, simply

position the holes of the bracket 5 cm below

mounted on a solid or reinforced wall.

the required height.

Table of Contents

Need help?

Do you have a question about the NOVA2 CARE N1963 and is the answer not in the manual?

Page 1 Manuel de montage Before installing, the installer must ensure that the material and strength of the wall are su cient. FROST CARE products must be mounted on a solid or reinforced wall. Recommended installation height: 37 - 41 cm If any other user height is required, simply position the holes of the bracket 5 cm below the required height.
Page 2 Stainless steel surfaces should be cleaned with a micro bre cloth, glass cleaner or other non We recommend all FROST CARE products are installed on a solid wall. Reinforcement should abrasive and gentle agents. always be used if the wall is not stable. All tests are carried out on products mounted on a solid wall, thus we cannot guarantee the same performance and durability if this is not observed.
Page 3 SEAT Bavne Allé 6E DK-8370 Hadsten +45 8761 0032 info@frost.dk www.frost.dk NOVA2 CARE SEAT N1963...