Anti-Shake(Hdis) - Samsung SMX-F40 User Manual

Anti-Shake(HDIS)

Use the Anti-Shake (HDIS) function to compensate for unstable images caused by shaking movements when
holding the camcorder.
PRECHECK!
Select the Record ( /
1. Press the MENU button  Control joystick (/)  "Anti-Shake
(HDIS)."
2. Select the desired submenu item with the Control joystick (/),
and then press the OK button.
3. Press the MENU button to exit the menu.
Submenu Items
items
Disable the function.
"Off"
The Anti-Shake (HDIS) function is enabled to
"On"
compensate for shaking movements.
Tip
Use the Anti-Shake function in the following cases:
• Recording when using the zoom extensively
• Recording a close up picture of a small object
• Recording while walking, or moving
• Recording through the window, from inside a vehicle
• The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to On.
• Gross camcorder shake may not be entirely corrected even if "Anti-Shake (HDIS): On" is set.
Firmly hold the camcorder with both hands.
• When this function is set to "On," the actual movement of the subject and the movement
displayed on the screen may be slightly different.
• When recording in dark lighting at high magnifi cation with this function set to "On," may cause
after-images. In this case, we recommend using a tripod (not supplied) and turning the "Anti-Shake
(HDIS)" to "Off."
) mode by pressing the MODE button. page 24
contents
STBY 0:00:00 [475Min]
Anti-Shake(HDIS)
Off
On
Exit
STBY 0:00:00 [475Min]
Anti-Shake(HDIS)
Off
on-screen
On
display
-
Exit
59