Download Print this page

Aktobis AG SG-EH100MID Operating Instructions

Plug housing

Download this manual

Operating instructions Plug housing SG-

Safety instructions and warnings:

Only use this meter: - as intended - in perfect technical condition - in compliance with the operating

instructions and safety regulations

Do not connect plug housings in series!

Do not operate the plug housing covered!

Do not dispose of the old appliance with household waste, but take it to the local recycling centers!

Intended use:

The customary local standards, guidelines, provisions and regulations must be complied with. The meter

may only be installed by qualified and appropriately trained personnel. The meter must be protected from

moisture during storage and transportation and must not be operated outside the specified technical data

(Imax=15A!). If the housing is damaged, the device may no longer be used!

Maintenance and cleaning:

The SG-EH100MID is maintenance-free. Repairs may only be carried out by the manufacturer. To clean the meter, wipe

it with a dry, soft cloth when it is disconnected from the power supply. Never use corrosive substances or substances

containing solvents for cleaning.

Attention: Opening the appliance invalidates the calibration and any warranty.

EH100MID

Need help?

Do you have a question about the SG-EH100MID and is the answer not in the manual?

Page 1 Maintenance and cleaning: The SG-EH100MID is maintenance-free. Repairs may only be carried out by the manufacturer. To clean the meter, wipe it with a dry, soft cloth when it is disconnected from the power supply. Never use corrosive substances or substances containing solvents for cleaning.
Page 2 Description: The SG-EH100MID energy and hour meter was developed for portable devices that are primarily used in the rental sector. A mandatory MID-compliant version (EN50470-1 and EN50470-3) is required for billing the customer. The calibrated version is identified on the type plate of the meter by the year it was placed on the market (e.g. M19) and the name of the notified body that performed the calibration (e.g.
Page 3 This declaration certifies compliance with the aforementioned directives, but does not constitute a guarantee of properties. Safety instructions in the supplied product documentation must be observed. Securing the mains cable on the SG-EH100MID energy meter Securing the plugged-in mains cable prevents the customer from removing the connected mains cable of the plugged-in appliance.