Download Print this page
Aktobis AG SL-EH100MID Manual

Aktobis AG SL-EH100MID Manual

Power strip

Advertisement

Quick Links

Power strip SL-EH100MID
Safety instructions and warnings:
Only use this counter:
as intended
in perfect technical condition
in compliance with the operating instructions and safety regulations
Do not connect power strips in series!
Do not operate the power strip uncovered! Do not dispose of the old appliance with household waste, but dispose of it at
local recycling centers.
Intended use:
The customary local standards, guidelines, provisions and regulations must be complied with. The meter may only be
installed by qualified and appropriately trained personnel. The meter must be protected from moisture during storage and
transportation and must not be operated outside the specified technical data (Imax = 16 A!). If the housing is damaged, the
device may no longer be used!
Maintenance and cleaning:
The SL-EH100MID is maintenance-free. Repairs may only be carried out by the manufacturer. To clean the meter, wipe it
with a dry, soft cloth with the power disconnected. Never use corrosive substances or substances containing solvents for
cleaning.
Attention: Opening the device invalidates the calibration and any warranty
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de

Advertisement

loading
Need help?

Need help?

Do you have a question about the SL-EH100MID and is the answer not in the manual?

Questions and answers

Summary of Contents for Aktobis AG SL-EH100MID

  • Page 1 Maintenance and cleaning: The SL-EH100MID is maintenance-free. Repairs may only be carried out by the manufacturer. To clean the meter, wipe it with a dry, soft cloth with the power disconnected. Never use corrosive substances or substances containing solvents for cleaning.
  • Page 2 Description: The SL-EH100MID power strip was developed for portable devices that are primarily used in rental applications. A mandatory MID-certified version (EN50470-1 and EN50470-3) is required for billing the customer. The calibrated version is identified on the type plate of the meter by the year in which it was placed on the market (e.g. M16) and the notified body that performed the calibration (e.g.
  • Page 3 *This declaration certifies compliance with the stated directives, but does not constitute a guarantee of properties. Safety instructions in the supplied product documentation must be observed. Technical changes are possible at any time without prior notice. Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany www.AKTOBIS.de Email: Info@Aktobis.de...