Advertisement
Advertisement
Table of Contents
Related Manuals for Showven uFetti CB21
Summary of Contents for Showven uFetti CB21
- Page 1 USER MANUAL uFetti Blower CB21 V1.0 2024/11/25 SHOWVEN Technologies Co., Ltd...
-
Page 3: Safety Instructions
Thanks for choosing SHOWVEN uFetti Blower, we wish it will bring you lots of exciting moments. Please read the following user’s manual carefully before operating this product. Safety Instructions Δ 1. Safety icons explanation Safety instructions warn of hazards when handling equipment and provide information on how to avoid those hazards. -
Page 4: Technical Specifications
DMX: 3-pin and 5-pin DMX IN / OUT Output Direction: 50 ~90 Output Distance: Blower Speed Adjustable: Yes, adjust on software Output Density Adjustable: Yes Consumable: SHOWVEN Confetti 10kg paper confetti / 20kg metallic confetti Hopper Capacity: : 7-15min Continuous Working Time with Full Load... -
Page 5: Rear Panel
Rear Panel Δ 1. LCD Screen 2. 3-pin XLR IN/OUT 3. 5-pin XLR IN/OUT (5-PIN XLR IN can charge for wireless DMX pen through pin1 and 4, pin4 with DC5V power supply) 4. Power IN 5. Power Switch Display and setting Δ... - Page 6 SAFE: Safety channel address. Safety channel DMX value between 50-200, background color changes from black to red STATE: Machine status. When blower is working, STATE changes from “STOP” to “WORK”, and background color changes from black to red 2. Message information column Error message or output mode information display 3.
-
Page 7: Dmx Control
7. Main Menu Select “MAIN” in menu interface, press “EDIT” to enter main menu. BACK: Back to previous interface UP: up or + DOWN: down or – EDIT: Edit selected items SAVE: Save Items Contents Default Description Device DMX address Set DMX Address 1-512 Safety DMX address... -
Page 8: Operation
Always inspect the machine thoroughly before operating it. WARNING: Do not use the uFetti Blower if alterations have been made other than by or on behalf of SHOWVEN. WARNING: Make sure there are no objects that can be damaged by the machine within the output distance. - Page 9 2. Install uFetti Blower 2.1 Bring the machine to desired location. 2.2 Lock all four casters of the machine. 2.3 Unlock and remove the flight case cover...
- Page 10 For distance >200m please use SHOWVEN DMX splitter 8 to amplify the signal. f) Assign DMX address for each unit of uFetti Blower. If use SHOWVEN host controller or FXcommander to control the machine please allocate a unique DMX address for each unit of machine.
- Page 11 4. Feeding plate adjustment Operators can adjust the feeding volume/density by adjusting the feeding plate. a) When use confetti as below, suggest to set the feeding plate to the lowest position, to minimize the feeding volume. Of course operator can adjust it according to effect he/she wanted. b) When use confetti as below or used confetti, suggest to set the feeding plate to higher position to increase the feeding volume.
- Page 12 Paper Confetti Metallic Confetti NOTICE: The above parameters are test parameters with SHOWVEN original confetti with size of 55*17cm under ideal conditions with no wind, and the output plate angle is set at 50 degrees. 7. Power OFF and clean up a) Power OFF uFetti Blower, disconnect power and/or DMX cables.
-
Page 13: Maintenance
Damage caused by external reasons (lightning strike, power supply etc.) Damage caused by improper installation or use; For product damage not included in warranty range, we can provide paid service. Invoice is necessary when applying for maintenance service from SHOWVEN... - Page 16 Showven Technologies Co., Ltd. Tel: +86-731-83833068 Web: www.showven.cn E-mail: info@showven.cn Add: No.1 Tengda Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, 410300, P.R.China...
Need help?
Do you have a question about the uFetti CB21 and is the answer not in the manual?
Questions and answers