Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Showven uFetti Blower
Summary of Contents for Showven uFetti Blower
- Page 1 USER MANUAL uFetti Blower V1.0 2023/06/26 SHOWVEN Technologies Co., Ltd...
-
Page 2: Safety Instructions
Use only SHOWVEN original confetti, otherwise, may leads to failure or danger. The operator responsible for the control of uFetti Blower must always have a clear view of the device, so that he/she can stop the show immediately when there is danger. The main AC power switch should near operator. -
Page 3: Technical Specifications
Technical Specifications Δ uFetti Blower is a powerful confetti launcher with output up to 18m, equipped with dual fully automatic confetti dosing hopper and can be controlled both manually or automatically by DMX. Take advantage of the customized high-power blower and optimized Venturi tube design, the confetti can be spread farther and wider. -
Page 4: Rear Panel
Display and setting Δ 1. Main Interface uFetti Blower can be controlled by DMX or manually. Manual control disabled when there is DMX signal in. Click “MENU” in main interface, press and hold “RUN” to start the machine manually, press “STOP”... - Page 5 REGION ITEMS RANGE DEFAULT EXPLANATION When there is DMX signal in, background color DMX address 1~512 changes from black to red When safety channel DMX value between 20-200, Safety address 1~512 background color changes from black to red When blower is working, STATE changes from STOP / Device status STOP...
-
Page 6: Dmx Control
(feeding motor and blower motor). DefaultParameter ON/OFF Reset default parameter settings DMX CONTROL Δ uFetti Blower occupies 2 functional channel CH1, CH2 and 1 separate safety channel CH-S (this channel is independent from functional channels, can be shared with other machine). -
Page 7: Operation
Use of a damaged or improperly installed machine could result in death, serious injury, or property damage. Always inspect the machine thoroughly before operating it. WARNING: Do not use the uFetti Blower if alterations have been made other than by or on behalf of SHOWVEN. WARNING: Make sure there are no objects that can be damaged by the machine within the output distance. - Page 8 2.2 Lock all four casters of the machine. 2.3 Unlock and remove the flight case cover 2.4 Remove the slide panel. 2.5 Adjust the output angle of venture tube, make sure angle adjuster is locked.
- Page 9 DMX control, Please follow below steps: c) Connect a DMX cable to the DMX IN socket of first unit of uFetti Blower, another head of this DMX cable connect to DMX console (such as FXcommander). Make sure the DMX console is powered off.
-
Page 10: Maintenance
1. To maintain the machine in good performance and running status, it is recommended to running the device at least once per month. 2. To maintain the best performance of machine the hopper rollers (Part No. SFMET1163) need to be replaced after a period of use. Please contact SHOWVEN or your direct supplier for operation procedures. -
Page 11: Warranty Instructions
Damage caused by external reasons (lightning strike, power supply etc.) Damage caused by improper installation or use; For product damage not included in warranty range, we can provide paid service. Invoice is necessary when applying for maintenance service from SHOWVEN... - Page 12 Showven Technologies Co., Ltd. Tel: +86-731-83833068 Web: www.showven.cn E-mail: info@showven.cn Add: Liuyang Economic Development Zone, Changsha, 410300, Hunan Province, P.R.China...
Need help?
Do you have a question about the uFetti Blower and is the answer not in the manual?
Questions and answers