Pc Display; Using Your Tv As A Computer (Pc) Display - Samsung PN50A450 User Manual

Changing the Mode
❑
Turns on the D Effect. You can choose between Mode1 and Mode. To achieve the 3D
effect, the 3D glasses shutter back and forth from the left to right and vice versa (left/right
sync).
• Off: Turns the 3D effect function off.
• Mode1: Mode 1 operates with right sync first.
• Mode: Mode 2 operates with left sync first.
• D: Picture is converted from 3D to 2D. Choose this to watch a 2D picture when you
are experiencing eyestrain.
If the 3D effect is not working properly, it means the Mode and 3D glasses may not
N
be syncing properly. To put them in sync, switch to the other mode.
Changing the Format
❑
Select the optimal input format to match your graphic cards or 3D software.
• Checker Board: If the output format of your graphic card or 3D software is Checker
Board, select this input format.
• Horizontal: If the output format of your graphic card or 3D software is Horizontal
interleaved, select this input format.
• Vertical: If the output format of your graphic card or 3D software is Vertical interleaved, select this input format.
PictureReset→ResetPictureMode/Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N

PC Display

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and your
particular video card. However, even if your actual screens look different, the same basic set-up
information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on Control Panel on the Windows start menu.
. When the control panel window appears, click on Appearance and Themes and a display
dialog-box will appear.
. When the control panel window appears, click on Display and a display dialog-box will
appear.
4. Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution)
Optimum: PN42B450B1D : 1024x768 pixels, PN50B450B1D : 1360x768 pixels
If a verticalfrequency option exists on your display settings dialog box, the correct value is 0
or 0 Hz. Otherwise, just click OK and exit the dialog box.
the Windows start menu.
English - 
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
HDMI Black Level : Normal
Film Mode : Off
Screen Burn Protection
3D Effect
Move Enter
3D Effect
Mode : Off
Format : Checker Board
Move Enter
Advanced Settings
Picture Options
Picture Reset
Continued...
▶
Return
▶
Return
►