About the User’s Manual This manual is for reference in the instrument operation. Sunray Medical Apparatus Co., Ltd. will not be responsible for any result caused by using this manual for other purpose. All the information in this manual is copyright protected, and no part of this User’s Manual can be copied, duplicated, or translated into other languages without the company’s written permission.
4. Alkaline battery of high efficiency is the only kind of batteries that could be used in the instrument. Other batteries may leak, causing severe damage to the instrument. 5. When battery voltage is low (low voltage hint appears: the battery sign is empty and flickering), the battery voltage is not enough and batteries should be renewed in time.
Ⅵ. Structural Composition Probe Probe clip LCD Displayer + Back clip - MENU Battery cover POWER Cover button Host Probe socket Earphone socket Attention: Do not release the plug if not necessary. You can release the plug only when the instrument is power off.
Ⅷ. LCD Display Description Alarming Volume Indication Bar Status Battery Voltage Indicator Indicator Auto Average FHR Detection FHR Display Manual FHR Detection Note: The interface varies according to different setting of the operation mode. 1. The following two signs or displaying are auto-set or displayed, can not be set by the user. FHR Display: Displays the detected FHR.
Ⅸ. Function Description A. Modes of FHR display a. Transient FHR: When in transient FHR detecting, the instrument detects transient FHR and displays according to the fetal heart beat detected by the probe. b. Average FHR: When FHR display mode is selected the sign of “A” appears. The detected fetal heart beat signal will be detected once every five seconds for the average FHR and the value of FHR will be displayed.
Page 8
: Average FHR. Press MENU the second time, disappears and appears, then press “+” to confirm this selection. Otherwise press “-” to cancel this selection.. : Alarming. Press MENU the third time, disappears and appears, then press “+” to confirm this selection. Otherwise press “-” to cancel this selection. After the showing of one by one, press “MENU”...
Page 9
5. FHR Detection A. Auto FHR a. Power-on When the detect is not in use, it will be power-on if the POWER key is pressed for 2 seconds; when in use, it will be power-off when the POWER key is pressed for 2 seconds. Press the POWER key to set up the instrument.
b. Enter the manual FHR detection First of all, make sure the instrument is in function selection mode. When in FHR display mode, press MENU once, and will show. Press “+” to confirm the selection, and will keep flickering. Then the instrument has entered manual FHR detection. c.
3. Close the battery cabin: put the cabin cover at the right place as shown in the picture. Push the cover in the opposite direction as the arrow on the cabin cover indicates. Then the cabin can be closed smoothly Sunray Medical Apparatus Co., Ltd. 4/F, No.242, Tianhe Dong Road, Guangzhou, China...
Need help?
Do you have a question about the SRF618E and is the answer not in the manual?
Questions and answers