Omega PROFORCE PERFORMANCE OMSMBL User Manual page 7

HOW TO USE THE INTELLIDIAL
SPEED
Your PROFORCE PERFORMANCE™ Blender with Intellidial technology features 12 blending
speeds. To choose between the desired speed, rotate the dial to the SPEED screen. Press the
dial and speed 1 will appear on the screen. Rotate, then press the dial clockwise to choose
between speed 1-12. Once the speed has been selected, push the dial to begin blending.
Push the dial to pause. You can also PULSE during SPEED BLEND. Press and hold the dial for 2
seconds to PULSE.
NOTE:
The speed can be changed at any time during the SPEED BLEND cycle.
PULSE / PULSE SPEED
Your PROFORCE PERFORMANCE™ Blender with Intellidial technology features a PULSE function
that allows you to PULSE at 7 different speeds. To blend using PULSE, rotate dial to the 'P'
screen, then press the dial to select the desired PULSE speed ranging from 1-7. Press and hold
the dial to start blending, release to stop.
ICE CRUSH
Your PROFORCE PERFORMANCE™ Blender with Intellidial technology features an ICE CRUSH
function. To select the ICE CRUSH function, rotate the dial to the ICE CRUSH screen. Press the
dial to start blending. Press the dial to pause. For optimal ice crushing result, when using the
ICE CRUSH function, we recommend adding the ice up to the 4 Cups line.
11
HOW TO USE THE INTELLIDIAL
INFINITY
Infinity blending is a 20 second blending cycle from speeds of 1-12. The first 10 seconds speed
cycles from 0-12, following by another 10 seconds speed cycle from 12-0.
CLEANING
Clean Cycle blend runs for 60 seconds, starting at a low speed and gradually increasing to a
high speed, then decreasing again before stopping.
NOTES
PAUSE WHEN BLENDING
You can pause the blending at any time. Simply press the dial shortly when you see the 2 red
vertical bars icon (Pause). Press the dial again to restart blending. To stop blending after a pause,
turn the dial counterclockwise, and press the dial to return to the previous menu.
AUTOMATIC OVERLOAD PROTECTION
Your Omega motor is designed to protect itself from overheating. If the motor shuts OFF, turn
OFF the power switch for up to 45 minutes to reset, and press on the reset power button (I)
underneath the base. To reduce reset time unplug the machine, remove the container and
blow air into the center section.
NOTE:
If any moisture or liquid appears on top of the motor base during blending, turn off
the ON/OFF switch and then remove the power cord. Remove the Container. Wipe the motor
base immediately with a dry cloth or paper towelling. Check that the container is correctly
assembled.
12