Related Manuals for Homewardbath Steam Planet Superior Encore
Summary of Contents for Homewardbath Steam Planet Superior Encore
- Page 1 Steam Planet Superior Encore Steam Generator Installation & Operation Manual (6kW, 9kW, 12kW, 18kW & 24kW) Rev. 10/2024...
-
Page 2: Table Of Contents
Table of Contents Safety Notes .................................... 1 Warnings ....................................1 Important ....................................2 Installation of 6KW, 9KW, and 12KW steam generators....................2 Choose your steam generator size ............................3 Electrical Requirements ................................3 Dimensions ....................................3 Recommendations .................................. 3 Parts List .................................... -
Page 3: Safety Notes
Safety Notes • is a safety warning symbol that should be strictly observed. Failure to do so may cause bodily injury and financial loss. • The power supply must be installed according to the local standard and with GFCI (Ground Fault Current Interrupter.) Test the GFCI before using to confirm its security and validity. -
Page 4: Important
Important These are important updates for optimum performance of the Encore generator 1. When connecting the keypad and the steam generator to the power box for the first time, the keypad and the generator must be set to the same temperature scale setting, Celsius or Fahrenheit. a. -
Page 5: Choose Your Steam Generator Size
Choose your steam generator size Measure the length, width, and height in feet of the current steam shower or bathtub room. Example; L:7 x W:5 x H:8 = 280 Cubic feet x 2 to get complete cubic measurement Note: Multiplying the cubic feet by two is done to account for heat loss due to the room having natural stone such as granite or marble, exterior walls, ceiling height exceeding 8 feet, ceramic tile, or glass walls. -
Page 6: Parts List
Parts List Standard Package Steam Generator Power box Keypad with built-in temperature sensor, attached 11ft power cable and external temperature wire External temperature sensor wire External temperature sensor foundation 12ft power box extension cable 9.5ft cable for keypad or generator connection 1ft light cable attached to generator 25ft cable for single white light 1 ¾in Chrome steam head with aromatherapy (there are 2 with 12kw generator) -
Page 7: Wiring Introduction
Wiring Introduction Optional Dual Keypad and Dual Generator Setup The system consists of power box (GH21-PB), keypad (GH21EE), steam generator (GS08-HW) and Bluetooth box GH21- BT (optional). Power box (GH21-PB) provides 14v DC and there are 6 power output with DC5521 connectors. -
Page 8: Proper Installation Location
Proper Installation Location 1. Do not install near flammable objects or chemicals (coal, gas, etc.) 2. Do not install it in any places where the water might freeze. 3. The steam generator should not be installed inside the steam room. 4. -
Page 9: Installation
Installation 10 7/16in (264.5mm) 19 11/16in (500mm) 1. For wall mounting: Steam generator is installed outside the steam enclosure as per the diagram. Mark the position and drill the holes according to the marks. Insert expansion plug and tapping screws. Keep the screw head 3/8in (10mm) outside the wall. - Page 10 3. Keypad and steam outlet are installed according to the drawing below. Steam generator must be installed out of the steam shower. 4. The keypad can be installed according to the situation on site. Drill at least a ɸ20mm hole for the wires. Tear the sticker off keypad and stick it on the wall.
-
Page 11: Keypad Diagram
Warning: The steam outlet will get very hot! User should not be near the steam outlet. Note: Indentation at the top of the steam nozzle is for aromatherapy oils. Attention: To avoid scratching the steam nozzle, do not use any tools to tighten it. Attention: Please consult your distributors of building materials like acrylic, fiberglass or other heat-resistant material around the installation and position of steam nozzle. -
Page 12: Keypad Introduction
Keypad Introduction Icon Function Display after Turn or Push Explanation P: PRESS Confirm LP: LONG PRESS (3 SECONDS) Model Change Dial TL: TURN LEFT Option / Adjust / - / Last TR: TURN RIGHT Option / Adjust / + / Next Power on/off Power on/off Steam on/off... -
Page 13: Keypad Manual
Keypad Manual Dial There are two functions for the dial: Rotate it to select the manual and music. Adjust the volume, time and temperature. Confirm and exit Icons 1. Power on/off 2. Steam on/off 3. Bluetooth 4. Music 5. Volume 6. -
Page 14: Optional Bluetooth Box
• Light icon o LIGHT will flash on the display when light is selected. It will stop flashing and show current temperature after 20 seconds of non-use. o Press the dial to turn the light on/off. To start chromotherapy lights press and hold down the dial for 3 seconds, the display will then show “COL”. -
Page 15: Controlling The Bluetooth Option
Controlling the Bluetooth Option 1. Start Bluetooth a. Select the Bluetooth icon, then “AUdO” will flash. It will stop flashing and show current temperature after 20 seconds of non-use. b. Press the dial to turn on/off the function. It will display “ON” or “OFF” c. - Page 16 14 pg...
-
Page 17: Circuit Diagram For 6Kw & 9Kw With Optional Bluetooth
Circuit Diagram for 6kW & 9kW with Optional Bluetooth 15 pg... -
Page 18: Circuit Diagram For 12Kw With Optional Bluetooth
Circuit Diagram for 12kW with Optional Bluetooth 16 pg... -
Page 19: Maintenance
Maintenance The unit will drain automatically 20 minutes after use. Clean the steam generator every 60 uses, and 30 if on well water. 1. Wait for the completion of automatic water discharge after each use of the steam engine to make sure the water in the tank is discharged completely before cutting off power supply. -
Page 20: Drain Line, Valve And Tank Cleaning Manually
Drain line, valve and tank cleaning manually 1. Shut off the power at the breaker 2. Shut off the water supply 3. Disconnect the steam line/s, water supply line, drain line, and electric line from the steam generator. 4. Remove the generator and turn it upside-down to drain it of any remaining water. 5. - Page 21 2. Check that the keypad is connected to the power box 3. If problem persists, replace the keypad. NOTE - • The power box must be turned off for at least 30 seconds anytime devices are added, disconnected, or connectors are changed at the power box. •...
- Page 22 i. As the water inlet valve opens and closes you will see the voltage change from 0 to 11.88. This is normal. ii. When the tank is full the inlet valve should have 0 voltage. iii. The inlet valve will receive 11.88 volts when the tank requires more water. e.
-
Page 23: Parts Requests
Parts Requests Replacement parts can be ordered on hwbpro.com/parts/ If you don’t see the part to order visit homewardbath.com/support to submit a request. If you require additional assistance, call 866-783-2661. Warranty Information & Registration Please visit our website: homewardbath.com/warranty-registration Note serial number on the generator: ________________________ Registration must be completed within 45 days of receipt to be valid.
Need help?
Do you have a question about the Steam Planet Superior Encore and is the answer not in the manual?
Questions and answers