Viewing Picture-In-Picture - Samsung HP-T4234 Owner's Instructions Manual

Viewing Picture-in-Picture

This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you
cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see 'PIP Settings'
below for details. You can use the PIP feature to simultaneously watch two video sources. (See page 38 to select
the PIP picture sound.)
➢ While the V-Chip is in operation, the PIP function cannot be used. (Refer to page 56)
Activating Picture-in-Picture
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select PIP, then press the ENTER button.
2 Press the ENTER button again.
Press the ▲ or ▼ button to select On, then press the ENTER button.
➢ If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear.
Press the PIP button on the remote control to activate or deactivate the PIP.
➢ Analog TV signals can be viewed on the PIP screen while viewing the picture from
an external source (DVD, Set-top box, PC etc.) connected to the Component 1, 2,
PC and HDMI 1, 2 jacks on the main screen.
Changing the Size of the PIP Window
3 Press the ▲ or ▼ button to select Size, then press the ENTER button.
Press the ▲ or ▼ button to select the desired size of the PIP window, then press
the ENTER button.
If the main picture is in PC and HDMI 1 modes, Size is not available.
➢
You may notice that the picture in the PIP window becomes slightly unnatural
➢
when you use the main picture to view a game or karaoke.
English - 33
T V Setup
More
▲
Screen Burn Protection
HDMI Black Level : Normal
Film Mode : Off
Wall-Mount Adjustment
PIP
Function Help : On
SW Upgrade
Move
Enter
T V PIP
Off
PIP : Off
On
Size :
Position :
Channel : DTV Air 3 - 0
Move Enter
�����
���
��
T V PIP
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
Move
Enter
Continued...
►
►
►
►
►
►
►
Return
Return
Return