Connecting A Digital Audio System; Connecting An Amplifier/Dvd Home Theater - Samsung HP-T4234 Owner's Instructions Manual

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on
the TV and the Digital Audio
Input (OPTICAL) jacks on the
Digital Audio System.
When a Digital Audio System
is connected to the "DIGITAL
AUDIO OUT (OPTICAL)"
terminal:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
system's volume control.
What is OPTICAL?
• An optical cable converts an electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a
transmission system of digital audio in the form of a light wave that uses a glass conductor.
➢ 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each external input source device has a different back panel configuration.
➢
➢ If you have an external device (DVD player/Cable Box/Satellite receiver (Set-Top Box)) connected via HDMI to the TV,
audio is not output from the Optical jack.
Connecting an Amplifier/DVD Home Theater
1 Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] jacks on the TV
and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD
Home Theater.
When an audio amplifier is
connected to the "AUDIO
OUT [R-AUDIO-L]" jacks:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
Amplifier's volume control.
Each Amplifier/DVD Home Theater has a different back panel configuration.
➢
➢ When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
Digital Audio System
Optical Cable (Not supplied)
Amplifier/DVD Home Theater
Audio Cable (Not supplied)
English - 14
TV Rear Panel
TV Rear Panel