How to assemble the Wall Mount Bracket
Insert and tighten the Captive Screw in the direction of the arrow.
1
When done, mount the wall bracket on the wall.
Assemble the Support as shown in the
2
following figure and fasten it with the
screws after attaching it to the wall.
(The number of supplied screws
18. For your safety, fasten all 18
screws).
Hinge (Left)
Wall Bracket
14
Captive Screw
Hinge (Left)
There are two hinges
(left and right). Use the
correct one.
is
Support
Hinge (Right)
Wall Bracket
Hinge (Right)
After fastening the screws, check if the
3
support is properly installed as shown in
the figure below.
Hinge (Left)
Hinge (Right)