Upgrading The Software - Samsung HL-T5055W Owner's Instructions Manual

Upgrading the Software

Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive.
Upgrades will be possible by connecting a USB drive to the USB port located on the rear of your TV.
1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of
the TV.
2 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3 Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.
4 Press the ▲ or ▼ button to select USB, then press the ENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
5 If the firmware on the USB is properly recognized, the message Upgrade version xxxx to
version xxxx? The system would be reset after upgrade. is displayed.
Press the ◄ or ► button to select OK, then press the ENTER button. The upgrade starts.
Please be careful not to disconnect the power or remove the USB drive while upgrades are
being applied.
The TV will shut off and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are complete.
➢ The firmware and upgrade process may be different by country and region.
English - 55
USB drive
Picture Setup
More
▲
Function Help : On
SW Upgrade
Move Move Enter Enter Return
SW Upgrade Picture
USB
Move Enter Enter Return
Software Upgrade
Scanning for USB...
It may take up to 30 seconds.
Software Upgrade
Plug & Play
Upgrade version to version
XXXX XXXX
system would be reset after upgrade.
OK Cancel
►
►
Return
►
Return
? The