Product
• Indoor use only
• 3 step dimmable
information
• Clean the fitting with a soft dry cloth. Do not use abrasive chemical cleaners as
this will damage the finish
• This product contains Li-ion batteries
Aftercare and
Please note the touch sensor will use a small amount of current at all times and will
slowly drain the battery even when the light is off.
Troubleshooting
If you find the lamp turning itself off, even when the product is put on charge, it
means the battery has been almost completely drained and needs initial charging
before the lamp can be switched on again. Please refer to Step 4.
If there are technical issues with this product that you are unable to resolve,
please contact your nearest John Lewis & Partners shop or call Technical Support
on 03301 230106.
Specification
Max power: 2W
3000K 150Lm
INPUT Max.: 5W DC 5V 1A
Battery: 3.7V 4400mAh
IP rating: 20
Weight: 1.32kg
Charging time: 9 hours when fully discharged; 4.5 hours in normal use.
Time in use: 12 hours on full brightness
Separate supply unit
Direct current
2-year guarantee
At John Lewis & Partners we test every light to high quality standards.
That means we can offer you a 2-year guarantee.
Recycling
This symbol
indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further
details contact your local council or visit www.recycle-more.co.uk.
John Lewis plc
SW1V 2QQ
johnlewis.com
Made in China
SELV
13/05/2024
Please retain these instructions for future reference.
BEACON LED TOUCH TABLE LAMP
USER GUIDE
2
70676612
Need help?
Do you have a question about the 70676612 and is the answer not in the manual?
Questions and answers