Advertisement
Quick Links
1) Before you start, make sure you have all the equipment and it is fully
charged. Check that TimingAppLive installed is on the latest version.
a) FDS TBox (Two required if timing remote Start and Finish lines).
b) Phones/Tablets for running TimingAppLive
c) Sets of Photocell beams for each TBox with Tripods and Aerials.
2) Turn on one set of equipment (One T-Box and one set of beams) using the
procedure ... hold the "on" button until the light(s) appear then quickly
release and re-press the button and hold until fully on.
If you are not sure then view the YouTube videos below...
https://www.youtube.com/watch?v=UK1sBrKeIMI
https://www.youtube.com/watch?v=uszrF2Tqk5s
Timing Kit Setup
Advertisement
Related Manuals for FDS T Box
Summary of Contents for FDS T Box
- Page 1 1) Before you start, make sure you have all the equipment and it is fully charged. Check that TimingAppLive installed is on the latest version. a) FDS TBox (Two required if timing remote Start and Finish lines). b) Phones/Tablets for running TimingAppLive c) Sets of Photocell beams for each TBox with Tripods and Aerials.
- Page 2 SN (Serial Number). Start beam should be channel 3 or 5. Finish beam should be channel 4 or 6. Check Radio input locktime is 1 second on each channel. If using a display then check the RS232 (Jack) is set to “Display FDS” and 9600 baud.
Need help?
Do you have a question about the T Box and is the answer not in the manual?
Questions and answers