Disc Playback; Checking The Remaining Time - Samsung HT-DS1770 Instruction Manual

Disc Playback

1
Press OPEN/CLOSE button to
open the disc tray.
2
Load a disc.
• Place a disc gently into the tray with the
disc's label facing up.
3
Press OPEN/CLOSE button
to close the disc tray.
DVD VCD CD
• Playback starts automatically.
Note
•
Depending on the content of the disc, the initial screen may
appear different.
•
Depending on the recording mode, some MP3-CDs cannot
be played.
•
Table of contents of a MP3-CD varies depending on the
MP3 track format recorded on the disc.
To stop playback,
press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•
If pressed twice, "STOP" is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback
starts from the beginning.
21
To temporarily pause playback,
press PLAY/PAUSE during playback.
•
To resume playback, press PLAY/PAUSE ( ) but-
ton again.

Checking the Remaining Time

Press the REMAIN button.
•
For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed
DVD-
VIDEO
GROUP ELAPSED
TITLE ELAPSED
GROUP REMAIN
TITLE REMAIN
TRACK ELAPSED
CHAPTER ELAPSED
TRACK REMAIN
CHAPTER REMAIN
VCD CD
TRACK ELAPSED TRACK REMAIN
TRACK ELAPSED
TRACK REMAIN
TOTAL ELAPSED
TOTAL REMAIN
DVD-
AUDIO
MP3
22