GEL BLASTER STARFIRE Manual

CHARGE YOUR BLASTER

Use the provided USB-C cord to charge your blaster. Do not place your charging blaster on any fabric surface during charging. Do not leave blaster charging for an extended period of time, unplug it when the indicator light turns green.

INSTALL (2) AAA BATTERIES IN YOUR ACTIVATOR

To install batteries, remove the Starfire Activator feedneck by pulling it towards the back of your blaster. Once removed, locate the green door to the battery compartment. Loosen the screw in the battery compartment cover using a Phillips screwdriver and lift. Insert two "AAA" batteries as indicated inside the battery compartment. Follow the markings on the product for correct installation. Replace the battery compartment cover and tighten the screw using a Phillips screwdriver.

DO NOT OVERTIGHTEN

FILL YOUR HOPPER

Fill your hopper with hydrated Gellets – make sure all water is drained from the hopper before installing on your blaster. The Gel Blaster Starfire Activator will accommodate all gellets but will only charge Starfire Gellets for glow in the dark play.

INSTALL HOPPER ONTO BLASTER

Screw the full hopper into the Starfire feedneck, then flip your blaster upside down to slide the feedneck onto the top rail of the Starfire with the arrow pointing forward.

Make sure you slide the feedneck all the way forward until you feel and hear a "click". Failing to do so will cause your Starfire to misfire.

OPTIONAL: INTERCHANGEABLE BARRELS

Your Gel Blaster currently comes with the Standard Barrel pre-installed (175fps). To remove the barrel, use the Barrel Tool provided to unscrew the barrel. You can then install your orange Reduced Velocity Barrel (100fps) for a lighter blasting experience.

PROTECT YOUR EYES

Put on your provided eye protection when using your Gel Blaster StarFire. Make sure that others within firing distance are wearing eye protection too! Do not shoot at people not wearing proper eye-wear.

POWER ON AND HAVE A BLAST

Press the power button on the Starfire Activator. The UV light ring will power on and charge Starfire Gellets during gameplay. Switch between Single and Full-Auto with the Blaster Mode Switch.

IMPORTANT SAFETY INFORMATION

Retain these instructions for important safety information

This is not a toy. Adult supervision required. Misuse may cause injury. Eye protection must be worn by any player and person within range. Do not aim at anyone who is not participating in game play or is not wearing protective eyewear. READ INSTRUCTIONS BEFORE USE.

Displaying, transporting, or carrying this product may be prohibited in certain locations such as highly populated areas, schools, airports or other government property. Be aware of all local laws and regulations pertaining to the use of this item. Do not aim or shoot blaster at bystanders, animals or moving vehicles. Do not alter this product to look like a firearm.

Keep Gellets away from children. Do not ingest Gellets. Do not freeze Gellets®. Do not eat. Do not modify Gellets®. Always follow directions when making Gellets®. Do not aim at eyes or face during play.
Using only with Gel Blaster Official Products.

IMPORTANT BATTERY INFORMATION

STARFIRE BLASTER
The battery charger used with the electric product shall be regularly examined for damage to the supply cord, plug, enclosure or other parts. In the event of damage, it shall not be used until the damage has been repaired.

• Batteries are rechargeable
• Batteries are non-accessible and non-replaceable
• Do not alter the blaster battery

** The Gel Blaster® blasters provides hours of playtime per charge using a powerful lithium ion battery! But with that power comes the responsibility to take care of your battery. Abuse, neglect, or misuse can ruin your battery, shorten your playtime, or cause the battery to overheat. If Starfire won't take a charge, unplug immediately and contact support@gelblaster.com

STARFIRE ACTIVATOR

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickelcadmium) batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the supply terminals.
• Remove exhausted batteries from the product.
• Do not attempt to recharge non-rechargeable batteries.

FAQ & QUICK FIXES

Q: My hopper & feedneck keep sliding off and won't feed the Gellets into my Starfire™?
Please make sure your hopper is facing the right direction - the front arrow (on your feedneck) should be facing toward your fins. If installed correctly, the hopper and feedneck will click & lock in place.

Q: My Gellets® aren't shooting correctly and are rolling out of my Starfire's™ barrel?
This is caused by Gellets that aren't full size. To make sure your Gellets are fully hydrated, please allow your Gellets to be submerged in water for a minimum of 2hrs before playing. Longer for Starfire Gellets.

WATCH QUICK TIPS

www.gelblaster.com