Arctic Air FREEDOM Manual

Also See for FREEDOM:

Table of Contents

WHAT'S INCLUDED

Arctic Air™ Freedomcomes partially charged - For Best results, fully charge battery before first use.

NOTE: When fully charged, you can expect runtime of 3-6 hours depending on fan speed.

Using included USB cable, plug small end into charging port located on side of unit.
Plug large end of USB cable into a USB-Power adapter, laptop, or other device(not included).
Power Button will begin blinking to indicate unit is charging. When light remains solid, Arctic Air™ Freedom is fully charged.

Place Arctic Air™ Freedom around your neck, with Air Vents facing up towards your face.
Adjust your fit by using the flexible neck band until comfortable.
Press the power button located on the side to turn on - light will glow to indicate unit has power.

NOTE: Fan speed will default to HIGH. Press button again to change to MEDIUM, and again to change to LOW.
When done, press power button until unit turns off. Store in a cool, dry location until next use.

DO NOT allow any liquid to get inside Arctic Air™ Freedom. Do not submerge in any liquid.
DO NOT expose Arctic Air™ Freedom to wet or damp area. Use only in a dry locations.
DO NOT attempt to remove or replace the included battery.
DO NOT place near open flames or fire sources.
DO NOT use solvents or alcohols for cleaning Arctic Air™ Freedom.
Only use the original power cord supplied in package.
DO NOT allow any foreign objects inside Arctic Air™ Freedom
Arctic Air™ Freedom is intended for household use.
The manufacturer does not bear any responsibility for any damage from failure to comply with this product guide.

FOR HOUSEHOLD USE ONLY