1. Manuals
  2. Brands
  3. Nordic Manuals
  4. Grinder
  5. A61182
  6. Operating manual

Nordic A61182 Operating Manual

Corded angle grinder
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

CORDED ANGLE
GRINDER
OPERATING MANUAL
A61182

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A61182 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nordic A61182

Summary of Contents for Nordic A61182

  • Page 1 CORDED ANGLE GRINDER OPERATING MANUAL A61182...

  • Page 2: Product Specification

    NORDIC PRODUCT SPECIFICATION Voltage / Frequency: 240V ~ 50Hz Rated Power: 2200W No-Load Speed: 6000rpm Disc Diameter: 230mm Cable Length: Adaptor Type: SAA Plug GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.

  • Page 3: Personal Safety

    NORDIC 2.3 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
  • Page 4 NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. Special safety instructions for Angle Grinder • Check that the ventilation openings on the motor are not clogged. Always fasten the workpiece with clamps or similar.
  • Page 5 NORDIC • Release the spindle lock to release the spindle. Switch on the angle grinder on the on / off button and let it run unloaded for 30 seconds to check that it works properly and that no abnormal vibrations occur.
  • Page 6 NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;...

  • Page 7: Cleaning And Maintenance

    NORDIC CLEANING AND MAINTENANCE 9.1 CLEANING • Keep the ventilation slots of the machine clean to prevent overheating of the engine. • Regularly clean the machine housing with a soft cloth, preferably after each use. • Keep the ventilation slots free from dust and dirt.
  • Page 8 NORDIC...

Table of Contents