Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic MGDC-120V
Summary of Contents for Nordic MGDC-120V
- Page 1 12V CORDLESS MINI DIE GRINDER OPERATING MANUAL MGDC-120V...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: Rated Speed: 5,000-25,000rpm Max Collet chuck size: 3.2mm A weighted sound pressure level: LpA: 60.4dB(A) ; KpA=3dB(A) A weighted sound power level: LwA: 71.4dB(A) ; KwA=3dB(A) Typical weighted vibration: ah=1.289m/s2 ; Uncertainty: k=1,5m/s2 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. -
Page 3: Personal Safety
NORDIC • If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual current device (RCD). Using an RCD reduces the risk of an electric shock. 2.3 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. -
Page 4: Additional Safety Instructions For Batteries And Chargers
NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. Special safety instructions for Rotary Tool • The device has been designed as a Rotary Tool. Read all warnings, instructions, drawings and specifications provided with this power tool. - Page 5 NORDIC • When disposing of batteries, follow the instructions given in the section “Protecting the environment”. • Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via • Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to heat generation causing rupture or file.
- Page 6 NORDIC Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max. (Only for battery)
-
Page 7: Product Accessories
NORDIC 6. PRODUCT ACCESSORIES Collet chuck Cutting Discs Polishing Discs Grinding Discs Grinding Bits HSS Drills Holders Milling Bits Engraving Bits Spanner Brush Nylon Brush Metal Brush 7. BEFORE YOU START Carefully remove the tool and any accessories from the box. Check for any damage before attempting to use, turn off the machine. - Page 8 NORDIC CHARGING THE BATTERY To start the charging process plug the charger into the battery, then plug in the battery charger to the main The battery and charger become warm during the charging process, this is normal After termination of the charging process, pull charger plug out of mains socket unplug charger from battery.
-
Page 9: Changing Accessories
NORDIC COLLETS Different size collets to accommodate different shank sizes are available To install a different collet, remove the collet nut and remove the old collet. Insert the un-slotted end of the collet in the hole in the end of the tool shaft. Replace collet nut on the shaft Always use the collet which matches the shank size of the accessory you plan to use. -
Page 10: Maintenance
NORDIC MAINTENANCE 9.1 CLEANING • Keep the ventilation slots of the machine clean to prevent overheating of the engine. • Regularly clean the machine housing with a soft cloth, preferably after each use. • If the dirt does not come off use a soft cloth moistened with soapy water. - Page 11 NORDIC 1.Chuck 2. Spindle Lock 3. Speed Regulator 4. Battery Indicator 5. Battery (not included)
- Page 12 NORDIC...
Need help?
Do you have a question about the MGDC-120V and is the answer not in the manual?
Questions and answers