Xtorm FS510 Fuel Series, FS5101 Manual

SPECIFICATIONS

	10.000 mAh Li-Polymer / 37Wh
	1x USB-C PD 20W 1x USB-C 18W 1x USB-A 22.5W (QC 3.0 18W / SCP 22.5W)
	USB-C PD 18W input
	136x71x15 mm
	218 grams
	1x USB-C PD cable 1x Manual

When using multiple outputs
When using 2 outputs
/ Share 15W
/ Share 15W
/ Share 15W

When using all outputs
/ / Share 15W

PRODUCT OVERVIEW

1. Output
   USB-C PD 18W
2. Output
   USB-A 22.5W
   QC 3.0 18W / SCP 22.5W
3. Output
   USB-C 20W
4. Input
   USB-C PD 18W
5. Power Button
6. Digital Power Indicator
7. Official Xtorm Label

CHARGING YOUR DEVICE

1. Connect the USB end of the charging cable to the USB-A output of the Power Bank and the other end to the input of your device. The charging will start automatically.
2. Charging some devices requires a charging cable other than the one supplied.
   E.g. an Apple Lightning or a Micro USB cable.

RECHARGING THE PRODUCT

1. Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
2. For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 3.4 hours.

LED POWER INDICATOR

1. Power Button function:
   • Single press to turn on the Power Bank.
   • Double press to turn off the Power Bank.
2. The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
3. The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).

IN THE BOX

1. FS510x
   Power Bank
2. USB-C PD Cable
3. Manual

CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800

TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands

XTORM.EU

Documents / Resources

References

• Xtorm | | Power Banks | Solar Chargers | Power Stations – Xtorm EU

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Xtorm FS510 Fuel Series, FS5101 Manual