Table of Contents
Advertisement
Getting Started
You will need the following items to start using your new RioVolt:
•
The RioVolt
•
2 AA Alkaline Batteries (included) or the Rio Volt AC Adaptor (included)
•
Headphones (included) or powered speakers (not included)
•
Remote Control (included)
1. Open the Battery Compartment Door by sliding it away from
the RioVolt and insert 2 AA Alkaline batteries (included).
2. Slide the Battery Compartment Door back to its original
position to close.
OR
Plug the RioVolt AC Adaptor into the Power Port on the side of
the Rio Volt.
3. Plug the Headphones Cable into the
Headphones Port on the side of the
RioVolt.
OR
To use the Remote Control, plug the
Headphones Cable into the Remote
Control, and then plug the Remote
Control Cable into the Headphones
Port on the side of the RioVolt.
The Remote Control can then be clipped to your clothing for easy access.
4. Slide the Release Latch at the front of the RioVolt to the right to
open the case.
Release Latch
5. Place a music CD or a CD that you have burned with your own
digital music files into the RioVolt.
6. Close the top lid securely.
Headphones
Speaker
Port
Port
Hold
Switch
Getting Started
Return to Pg.1
Page 6
Battery
Door
Power
Port
Advertisement
Table of Contents
