Advertisement
Charging Case
Earbuds
Type C Charging Cable
Manual
Extra Pair of Eartips
Warranty Card
Product Name – TWS Bluetooth Headset
Model – Boult Audio AirBass
Bluetooth Range - ~10m/33ft (without any obstacles)
Earbuds Charging Time – 60 mins
Frequency Range - 20Hz - 20KHz
Technology - HFP/HSP/A2Dp/AVRCP
Input - DC5V = 1A
Install the 'Boult Amp' App from the Play Store or App Store
Scan & Download 'Boult Amp' App
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part of the earbuds handle.
Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear.
Charging The Case
Front LED flashes green continuously, and side LEDs breathe
When Fully Charged
Front LED stays green, and side LEDs goes OFF
Power ON:
Auto: Open the charging case and take out the earbuds to Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF:
Auto: Place both the earbuds in the charging case, close the lid.
Manually: Hold MFB for 5 seconds.
Play/Pause
Tap the MFB once
Next Track
Double Tap the right MFB
Previous Track
Double Tap the left MFB
Volume +
Triple Tap the right MFB
Volume -
Triple Tap the left MFB
Voice Assistant
Long Press the MFB for 2s
Answer the Call
Tap the MFB once
End Call/Reject
Double Tap the MFB
Game/Music Mode
Tap the MFB four times
Open the charging case, and take out the earbuds, the earbuds LEDs will start flashing automatically until paired with a device.
Activate Bluetooth on the device, turn on Bluetooth, search for pairing name "Boult Audio Airbass" and click on it.
Single Earbud Usage (Mono Mode): Please note that both the earbuds can be used in Mono Mode.
When both the earbuds are connected, put one earbud back into the charging case; the other earbud can be used normally.
To disconnect from either of the devices, go to the Bluetooth settings of the respective device and press disconnect/forget.
Turn off mobile phone's Bluetooth, earbuds will enter pairing mode and can pair with other devices. If the connection range is exceeded, the earbuds will enter back into connection mode. If there's no connection within 5 minutes, the earbuds will turn off.
If your earbuds fail to pair, or only one works, reset them.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Audio AirBass and is the answer not in the manual?
Questions and answers