Shokz OPENCOMM 2 - Headphone Manual

How It Works

Headset Controls

ON/OFF

Turn on the headset:
Press and hold the Power/Volume + Button until the LED Indicator flashes blue.

*Audrey will say, "Welcome to Shokz."

Turn off the headset:
Press and hold the Power/Volume + Button until the LED Indicator flashes red. *Audrey will say, "power off."

Pairing to Mobile Device

Operate controls with your headset powered off.

1. Start with your headset turned off.
2. Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
   

3. Select "OpenComm2 by Shokz" on your device's Bluetooth settings. Audrey will say, "Connected".

HOW TO WEAR

Slide the headset over your head, bring it to the back of your neck and position the ear-hooks on your ears.

*Position the noise-canceling microphone close to your mouth.

*Wearing your headset the wrong way could cause discomfort.

Be sure you have the transducers resting in front of your ears.

Music and Calls

	Adjust volume	While your audio is playing, adjust the headset volume by pressing either the "Volume +" or "Volume -" buttons. *A "beep" will sound when the volume is at its max. *Listening with your headset at a high volume may affect your hearing and the audio will be distorted.
	Switching EQ Modes	Press and hold both buttons (Power/Volume + button and Volume - button)while music is playing until you hear a voice prompt.
	Play/pause music	Click once
	Next song	Double-click while music is playing
	Previous song	Triple-click while music is playing
	Switch language	Double-click while pairing
	Answer call	Click once when a call comes in
	End call	Click once during a call
	Reject call	Press and hold for 2 seconds when a call comes in
	Answer an incoming call and end the current call	Press and hold for 2 seconds when receiving a second call
	Answer an incoming call and place the current on hold	Click once when receiving a second call
	Switching between two calls	Click once
	Ending a call and switching to a call on hold	Press and hold for 2 seconds
	Activate voice assistant	Press and hold for 2 seconds when the device is on standby
	Mute microphone	Click once when on a call *Audrey will say, "mute on".
	Unmute microphone	Click once when on a call *Audrey will say, "mute off".

Check Battery Status

Operate controls while audio is not playing

Power/Volume + Button

Volume - Button

How to check battery status:
Click the "Volume +" or "Volume -" button while music is paused, Audrey will tell you what the battery status is:
* "Battery high/Battery medium/Battery low/Charge me"

Extra Features

EQ Modes

Standard Mode
Balanced frequency for listening to music

Vocal Booster Mode
Enhanced intermediate frequencies for audiobooks, podcasts, etc.

Switching EQ Modes

How to switch EQ mode:
Press and hold both buttons (Power/Volume + Button and Volume - Button) while music is playing until you hear a beep.
*Audrey will say, "Standard Mode/Vocal Booster Mode."

Turn Multipoint Pairing On

1. Start with your headset powered off.
2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button and Volume + button until Audrey will say "multipoint enabled."
4. Open first device's Bluetooth® menu and select "OpenComm2 by Shokz."Audrey will say "connected".
5. Turn your headset off.
6. Re-enter pairing mode by pressing and holding Volume + until Audrey says "pairing"and the LED indicator flashes red and blue alternately.
7. Open second device's Bluetooth® menu and select "OpenComm2 by Shokz."Audrey will say "connected."
8. Turn your headset off.
9. Turn your headset on. Your headset is now connected to both devices.

Turn Multipoint Pairing Off

1. Start with your headset powered off.
2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button and Volume + button until Audrey will say "multipoint disabled."

Restore Factory Settings

Operate controls with headset powered off

1. Start with your headset powered off.
2. Press and hold the "Volume +" button until Audrey says "Pairing". The LED indicator will flash red and blue.
   
3. Press and hold the multifunction button, Volume - button, and Volume + button until you hear two beeps and feel the vibration.
4. Turn your headset off. The headset is now reset and can be re-paired to your device.

Changing Languages

Your headset has four built-in languages: Chinese, English, Japanese and Korean.

Follow the instruction when your headset is powered off.

1. Start with your headset powered off.
2. Press and hold Volume + until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
3. Double-press the multifunction button. Languages have been switched when you hear the corresponding language.
   

Care and Maintenance

Charging Tips

The headset will automatically shut down when charging

When the headset is at low battery, there will be a "charge me" prompt and the red light will flash intermittently. Use the corresponding magnetic charging cable for charging.

The LED indicator will turn red during the charging process and the headset will automatically turn off. The LED indicator will turn from red to blue when charging is complete.

Moisture Detection Alert

How it Works:
These headsets can detect liquid such as water, sweat, or rain. If the headset is plugged into the charger while wet, the LED indicator will flash red and blue. The headset will then emit a beep. If this happens, remove the charging cable, dry them completely, then proceed with charging.

Warranty

Your headset is covered by a warranty. Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty. *Failure to register will not affect your limited warranty rights.

Troubleshooting

If you experience any issues or problems, please visit https://shokz.com/pages/faq for more support

What's in the Box

If any part of your product is damaged or missing, do not use it. Contact authorized Shokz dealer or Shokz customer service.

*Please note that the packaging envelope may vary depending on the sales region.