Nixplay Seed, W10B - 10 Inch WiFi Digital Picture Frame Manual

Table of Contents

Contents

1 Introduction
2 Get to know your frame
3 Remote Control
4 Setting up
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

Introduction

Nixplay tutorial videos are available to watch on our Nixplay YouTube channel:

youtube.com/nixplaycloud

For full details and support please refer to:

support.nixplay.com

Get to know your frame

Motion Sensor
Senses movement and turns the Digital Frame on and off when standby mode has been configured.
Infra-red Sensor
Receives signals from the remote control

Remote Control

Infra-red Transmitter
On / Off
Back
Display Playlists (Photos only)
Navigation Menu
Select / Play / Pause
Settings

Setting up

Setting up - Step 1
Setting up - Step 2
Position the frame in either portrait or landscape orientation, bend the power cable to stand and to support the frame. For W13C, place the rubber strip under the frame for grip and support.

Setting up - Step 3

Connect the frame into the DC connector.

Plug the DC Connector into the Power Adaptor.

Plug the Power Adaptor into the wall socket.

* The USB cable can only be powered from the supplied power adaptor. It cannot be plugged into a computer, laptop or tablet device (not applicable for W13Bor W13C).

A welcome message will appear on the screen. Using the remote, select your desired language then press to continue.

Using the remote, select your Wi-Fi network, enter the associated Wi-Fi password and select Connect.

Visit www.nixplay.com to create your Nixplay account or log in. Alternatively, you can go to Google Play or Apple App store to download the Nixplay Mobile App.

(Nixplay Seed Wave (WI 3C) only)
To set up Bluetooth, go to the 'Settings' menu and select 'Bluetooth'. If you are pairing your Bluetooth-enabled device for the first time, select 'Enable Discovery Mode' from the frame. Ensure your device has Bluetooth turned on and select Nixplay Seed Wave from the list to pair.