POGS The Gecko 2 - Wireless Kids Headphones Manual

What's in the box

Optional accessories

(available on www.pogsheadphones.com)

The Gecko 2 controls

Using POGS The Gecko 2

Turning The Gecko 2 on and off

Move the slider to the right to turn on The Gecko 2. The logo light will turn on and you will hear the sound of morning birds. The Bluetooth® pairing light (blue LED) will start blinking slowly and your POGS will search for a known device for up to 25 seconds. If a known device is found nearby, it will connect automatically. If no known device is found within 25 seconds, the Bluetooth^® pairing mode will be activated and the blue LED light will blink fast.
You control the volume on your headphones with your connected device.
Move the slider button to the left to turn off the headphones. The LED logo light will switch off. When turning them off, you will hear the night sound of an owl.

Setting up Bluetooth^® wireless connection

(Bluetooth^® v5.4)
To activate Bluetooth^® pairing mode to pair a new device, press the Bluetooth^® pairing button and hold for 5 seconds. The blue Bluetooth^® pairing LED light will start to blink fast.

To connect to your Bluetooth^® device, select 'POGS The Gecko' on your device. The blue Bluetooth pairing LED light will be on continuously when connected. Audio sounds will be heard when connected and disconnected.

For Android devices, Google Fast Pair prompt will appear on the device to allow for quick connection.
To disconnect, press Bluetooth^® pairing button for 5 seconds. Or disconnect headphones using your Bluetooth^® device.

Music sharing with wireless POGLink

For kids to enjoy music or other content together, you can share audio between two Gecko 2s without cables getting in the way. Wireless POGLink is activated and deactivated by pressing the Bluetooth® pairing button as instructed below, first on the Gecko 2 that is connected to your audio device and then on the second Gecko 2. The blue LED light will be on continuously once connected.

1. To activate POGLink, press Bluetooth® pairing button 2x quickly on The Gecko connected to audio device (blue LED will blink fast)
2. To connect the second Gecko, press same button on second Gecko 3x quickly (blue LED blinks slowly)
3. When the two Gecko's are linked, the blue LED light is continuously on, on both Gecko's
4. To disconnect POGLink, press same button 2x quickly again on either Gecko
5. To connect the second Gecko to a different Bluetooth® device after ending POGLink, please go to the Bluetooth® menu on your device

When POGLink is activated, an audio prompt will be heard in the headphones saying 'POGLink activated'. When the two Gecko 2s are connected, the voice will say 'POGS linked'. When disconnected by turning POGLink off, or when out of Bluetooth^® range, the voice will say 'POGS unlinked'.
Note that you can only connect two POGS The Gecko 2 headphones together using wireless POGLink. If you wish to link other POGS headphones, please use the POGS-Splitter, an optional accessory available on www.pogsheadphones.com.

Renaming your POGS The Gecko 2

You can change the name of your POGS The Gecko 2 on the device you have connected to your POGS using Bluetooth^®, if your device supports this. This will make it easier to select your POGS for Bluetooth^® connections in the future, especially if there are multiple POGS products around.
If your device supports this, you will be able to see the battery level of your POGS on your device and have the option to change the name of your POGS.
You can also change the name of your POGS in the POGS app (see later chapter)
If you have an Android device, you can rename your POGS The Gecko 2 through your Android device (Google Fast Pair).

Charging your POGS The Gecko 2

To charge your POGS The Gecko 2, you will need a universal USB-C charging cable. This cable is not included in the box with your headphones, yet available as optional accessory at www.pogsheadphones.com or any other electronics store.
One of our POGS principles is to reduce our impact on the environment and to minimize waste. Most households already have USB-C charging cables, so adding these in the box can result in many unused cables. Instead, we offer the cable as an accessory if needed.

When battery is below 20%, the LED logo light will blink every 30 seconds. A battery low audio prompt will be given when battery reaches 20%, 10% and 5% of capacity.
When charging the logo light will be on. After charging, the headphones will be off and will need to be turned on again to use.
If you are out of battery, The Gecko 2 can still be used with an audio cable. Equally, when using The Gecko 2 where a wireless connection is not possible, like in an airplane, an audio cable can be used. Please always use the POGS-Safe cable when using the product with cable (available on www.pogsheadphones.com).
When using a cable to connect to your output device when out of battery, please make sure you are using the POGS-Safe cable. This cable has unique built-in technology to limit the volume to a maximum of 85 dB, which other audio cables do not.
For your safety, the headphones cannot be used during charging.
To prolong battery lifespan, fully charge at least once every 3 months. Battery life varies by use and settings.

Using the Play/Pause button for music, phone calls and voice control

Audio signals

Below is a summary of the audio signals for the various functions of the POGS The Gecko 2 headphones.

Controlling your headphones with the POGS app

Your POGS The Gecko 2 headphones can be controlled with the POGS app.

Audio controls to ensure safe listening

• Check and change volume level
• Mute headphones
• Change maximum volume of headphones
  (recommended to lower below 85 dB maximum)

Timer

• Monitor how long headphones have been used, and reset timer for instance at the start of the week. Please don't exceed stated times for set maximum volume levels.
• Set timer for headphones to shut down with option to send alarm before shut-down
• Change audio settings (equalizer)

Other settings

• Set color of your headphones
• Change name of your headphones (will show up when connecting with Bluetooth^®)
• Over the air – software updates
• Get support
• Review privacy policy

Download the Android app from the Google Play Store or the iOS app from Apple App store.

After installing on your device, please connect the headphones as usual via Bluetooth®. Once the headphones are connected, open the POGS app, and choose to add headphones. Select the headphones and you will get access to the controls.
You can also control your POGS from one device while streaming audio from another. Let's use the example of controlling your POGS with the POGS app on your phone, while your kid is streaming audio from a tablet. First, connect your POGS to your phone via Bluetooth (see Quick Start Guide if needed). Open the POGS app on your phone, and add your headphones by following the instructions. Once connected, press and hold the pairing button on your POGS to make your POGS discoverable for the tablet. Then connect your POGS to your tablet via Bluetooth, just like you did previously with your phone. Now you can stream audio from your tablet to your POGS. Open the POGS app on your phone, select your POGS if needed, and you can control your POGS with the app from your phone.

Using your headphones with audio cable

When using a cable to connect to your output device, for instance in a plane or when out of battery, please make sure you are using the POGS-Safe cable. This cable has unique built-in technology to limit the volume to a maximum of 85 dB, which other audio cables do not.
Be aware that when using an audio cable, the audio level of headphones is determined by the power of the output device. Our POGS-Safe cable ensures a maximum of 85 dB at an output power of 1V, which is the maximum of most common consumer devices. If you are unsure, please contact the supplier of your device to verify.
This POGS-Safe cable is not included in the box with your headphones to ensure we do not produce more cables than are wanted by our customers. The cables are available as optional accessory at www.pogsheadphones.com. Select the POGS-Safe cable with the colored plugs.

The cable connection has priority over Bluetooth®. This means that if both connections are established, the music transmitted via cable will be played back.

Using the button on the optional POGS-Safe cable for music, phone calls, and voice control

When using the POGS-Safe cable, the button on the cable can be used to access the features on The Gecko 2.

Caring for your POGS headphones

We would love for you to use our products for a long time, and the products have been developed to withstand rough handling. Proper care can extend the lifetime of your POGS.

• We recommend that you clean the headphones regularly.
• Turn your POGS headphones off and remove all cable connections before you start cleaning.
• You can remove any dust or light dirt with a dry microfiber cloth.
• You can wipe off more stubborn dirt with a cloth which has been slightly dampened with water.
• Then, immediately wipe the damp surfaces off with a soft dry cloth without applying pressure.

Liquid can destroy your POGS headphones' electronics.

• Make sure that no liquids of any kind penetrate the headphones.
• Do not, in any case, use solvents or abrasive cleaners.

Trouble shooting

In case you have trouble with your POGS, please refer to our website www.pogsheadphones.com. Under the support section, you can find instruction videos as well as answers to Frequently Asked Questions.
Please make sure you have followed the instructions in this manual to ensure your headphones are charged and connected to your device with Bluetooth^® wireless connection or using the POGS-Safe cable.
If you are still facing issues, you can perform a factory reset of the headphones, by pressing the Bluetooth^® pairing button together with the Play/Pause button for 5 seconds. The logo light will flash 3 times when it resets.
We are also happy to help you find a solution if you contact us via email: hello@pogsheadphones.com.

For your safety

1. Read and keep these instructions.
2. Follow all instructions and warnings.
3. Clean only with a dry cloth or a lightly damp cloth.
4. Do not wear the headphones while charging, they will switch off when charging.
5. Use only attachments/accessories specified by POGS.
6. Refer all servicing or repairs to POGS through www.pogsheadphones.com.
7. Do not expose your headphones to rain, dripping, splashing or moisture of any kind. For instance, do not use your headphones outdoors during a thunderstorm, as this may result in electric shock or malfunction of your headphones.

Protect your hearing

Although POGS are volume-limited headphones, the WHO recommends limiting the use of headphones. Extended listening may negatively impact hearing. And only use the volume limited POGS-Safe cable when using The Gecko 2 with a wired connection.

Beware of your surroundings
Your headphones dampen external noise. Do not in any case wear your headphones when you are required to pay attention to your surroundings.

Safety notes for lithium polymer batteries
Please do not open the products. Service should only be done by POGS B.V. or a service agent appointed by POGS B.V. Inside the product is a battery, which is normally inaccessible.

• Don't disassemble, crush, puncture, short external contacts, expose to temperature above 60°C (140°F), sunshine, or expose to extremely low air pressure, or dispose of in fire or water.
• Make sure that children in particular do not have access to the installed storage battery. Properly dispose of a defective device at your local recycling facility.
• Do not allow battery acid to come into contact with skin, eyes or mucus membranes. In the event of contact with acid, immediately flush the applicable areas with plenty of clean water and consult a physician if necessary. Lithium batteries may explode if handled improperly.
• Do not heat or short circuit batteries or dispose of them in fire.
• Do not expose batteries to direct sunlight.
• If you suspect that the battery has been swallowed or otherwise incorporated, seek immediate medical attention. Leaking battery acid may lead to chemical burns, severe internal injury and, in extreme cases, even death.
• Only use the headphones to receive wireless signals in environments where the use of Bluetooth^® technology is permitted.
• Ensure that the headphones do not become wet. Protect them from moisture, heat (e.g. during the summer in cars) and mechanical influences (e.g. severe shocks, pressure and dropping). Only charge the batteries at ambient temperatures of 10 – 40°C.

Wireless specification
Bluetooth^® version 5.4
Bluetooth^® transmission frequency range: 2400 MHz – 2483.5 MHz
Bluetooth^® transmission power: ≤15 dBm (EIRP)