Subscribe to Our Youtube Channel
Related Manuals for POGS The Gecko 2
Summary of Contents for POGS The Gecko 2
- Page 2 We recommend you read through this manual to get the most out of your POGS headphones. We hope you enjoy your POGS and in case anything isn’t as you expected, please contact us via email at hello@pogsheadphones.com.
- Page 3 (on when powered on) Control buttons & jacks (see detailed image) Left/Right indicators LED logo light (on when powered on) USB-C charging jack Play/Pause button On/Off slider 3.5mm audio jack for Bluetooth pairing ® POGS-Safe cable light (blue LED) Bluetooth ® pairing button...
- Page 4 Move the slider to the right to turn on The Gecko 2. The logo light will turn on and you will hear the sound of morning birds. The Bluetooth® pairing light (blue LED) will start blinking slowly and your POGS will search for a known device for up to 25 seconds . If a known device is found nearby, it will connect automatically.
- Page 5 If you wish to link other POGS headphones, please use the POGS-Splitter, an optional accessory available on www.pogsheadphones.com. You can change the name of your POGS The Gecko 2 on the device you have connected to your POGS using Bluetooth ®...
- Page 6 If you are out of battery, The Gecko 2 can still be used with an audio cable. Equally, when using The Gecko 2 where a wireless connection is not possible, like in an airplane, an audio cable can be used.
- Page 7 Access voice control on connected device Long press and hold for more than 2 seconds Below is a summary of the audio signals for the various functions of the POGS The Gecko 2 headphones. Power Morning birds (on) / Owl (off) Bluetooth ®...
- Page 8 Then connect your POGS to your tablet via Bluetooth, just like you did previously with your phone. Now you can stream audio from your tablet to your POGS. Open the POGS app on your phone, select your POGS if needed, and you can control your POGS with the app from your phone.
- Page 9 Be aware that when using an audio cable, the audio level of headphones is determined by the power of the output device. Our POGS-Safe cable ensures a maximum of 85 dB at an output power of 1V, which is the maximum of most common consumer devices. If you are unsure, please contact the supplier of your device to verify.
- Page 10 When using the POGS-Safe cable, the button on the cable can be used to access the features on The Gecko 2. Play music Press once Pause music Press once Play next song Press twice Play last song Press three times...
- Page 11 Safety notes for lithium polymer batteries Please do not open the products. Service should only be done by POGS B.V. or a service agent appointed by POGS B.V. Inside the product is a battery, which is normally inaccessible.
- Page 12 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by POGS could void the user's authority to operate the equipment.
-
Page 13: Declaration Of Conformity
Your POGS have built-in battery that lasts for the lifetime of the product; removal is not possible for the user. Recycling or recovery centers should handle the dismantling of the product and the removal of the battery.
Need help?
Do you have a question about the The Gecko 2 and is the answer not in the manual?
Questions and answers