RCA M52732 User Manual page 24

1.
Repeatedly press
MFNWPROG
td
. 5. Then
press + to move to the next.
letter frame; Pressing - moves, you
back to the previous letter frame.
/
The labeling feature -lets you program
names (or labels) for the channel
Labeling Channels
(with
rem+
only) I ,, _ .+
numb,ers. The 'name you program
select SETUP MENU, and then press
will-then appear on the screen below .
the channel number whe,never the j
+, or - to display setup functions.
' Repeatedly
press.MENU*PkOG to
' channel number is .displayed.
select CHAN LABEL function.
,. '
';.
,',
Each name can'contain up to four
characters, and you'll be able to
assign up to 64 names. After 64
names or labels have been entered,
'.
/:
/-
!:.
the TV will display this message to
let you know ,no more channels can
be labeled:
CHAN LABEL: FULL.
Listed below ,are the letters and
characters from which you'll be able
2. Press ,+ to enter the CHAN LABEL
function. Four blank letter frames
will appear under the channel number.
/
/.a
to choose when programming the
channel labels:
ABCDEFGHIJKLM
N0PQRSTUVWXY.Z
(blank space) ! ' # $ % & ' ( .)
6+,-./0123456789:;
<=>?@
3. Select the channel number you want
You must use your remote control to
to label by pressing the CHAN'up or
down button (or by pressing two
create or erase labels.
,'
number b,uttons).
6. Repeat steps 4 and 5 until the name
is complete. ,You can now label
another channel, if desired, by
selecting thechannel number and
repeating steps 4 and ~5.
7. When finished, the display will
automatically disappear from the
screen in a few seconds. Your
labels will remain in memory until
you erase them. They are not
affected by power failures.
Erasing Labels
To erase a channel label, first follow
steps 1,2, and 3 above, and then press
CLEAR on the remote control.
.
/
4. 'Press and hold the VbL
up or down
button until the letter or character you
want appears on the screen. Pressing
VOL up sequences through the
characters in alphabetical order.
Pressing VOL down sequences the '
letters in reverse order.
Note: Autoprogramming new
'channels into the channel memory does
not affect the channel labels 'that are
already entered.