Razer CORE X, RC21-0131 - Enclosure Manual

Table of Contents

Contents

1 INTRODUCTION
2 PACKAGE CONTENTS / SYSTEM REQUIREMENTS
3 REGISTRATION / TECHNICAL SUPPORT
4 TECHNICAL SPECIFICATIONS
5 DEVICE LAYOUT
6 SETTING UP YOUR DEVICE
7 IMPORTANT SAFETY INSTRUCTIONS
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

INTRODUCTION

The Razer Core X Thunderbolt 3 external desktop graphics enclosure turns your laptop into a desktop-class gaming machine by adding external NVIDIA GeForce, NVIDIA Quadro, or AMD Radeon graphics*. The massive 650W power supply fuels the graphics card and provides 100W power delivery to compatible laptops via USB-C. Beauty meets beast with the ultimate external graphics solution.

*Graphics card sold separately.

PACKAGE CONTENTS / SYSTEM REQUIREMENTS

PACKAGE CONTENTS

Razer Core X external graphics enclosure
Thunderbolt 3 (USB-C) cable
Power cord*
Important Product Information Guide

*may include power cords for specific regions

SYSTEM REQUIREMENTS

PC or Mac with Thunderbolt 3 external graphics support
Razer Core X compatible PCI-E graphics card
Windows 10 64-bit (RSI or higher)
OSX 10.13.4 (or higher)

Note: Visit rzr.to/core for compatibility information; and to download the latest driver and firmware updates.

REGISTRATION / TECHNICAL SUPPORT

REGISTRATION
Register your product online at razerid.razerom/warranty to get real-time information on your product's warranty status.
If you haven't registered for a Razer ID yet, register now at razerid.razer.com to get a wide range of Razer benefits.
Serial number location

TECHNICAL SUPPORT

1 year limited manufacturer's warranty.
Free online technical support at support.razer.com

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Model No.: RC21-0131
Product No.: RC21-01310100
Connection to PC: Thunderbolt 3/USB-C (up to 40Gbps) cable
GPU Support (Desktop graphics card not included)
- GPU Type: Up to 3-slot wide, full-length, PCl-Express x 16 graphics card
Razer Core X Inner Dimensions (Approx.): 12.99 in / 330 mm (Length*) x 6.29 in / 160 mm (Height) x 2.36 in / 60 mm (Width)
*Height measured from the top of the PCIe connector to the bottom of the locking pin ramps
Internal Power Supply: 650W
Laptop Power Delivery: Up to 100W via USB-C

APPROXIMATE SIZE & WEIGHT

Length: 14.7 in / 374 mm
Height: 9.1 in / 232 mm
Width: 6.6 in / 168 mm
Weight: 6.46 kg / 14.2 lbs

DEVICE LAYOUT

DEVICE LAYOUT - Part 1
DEVICE LAYOUT - Part 2

Exhaust vents
Compartment release lever
Power port
Power Switch
Thunderbolt 3 (USB-C) port
PCI-E slot cover
Thunderbolt 3 (USB-C) cable
PCI-E port
PCI-E card release lever
6+2-pin power connectors

RAZER CORE X MAX INNER DIMENSIONS:
Length: 12.99 in / 330 mm
Height*: 6.29 in / 160 mm
Width: 2.36 in / 60 mm
Graphics card locking pin ramps location

*Height is measured from the top of the PCI-E port to the bottom of the locking pin ramps.

GRAPHICS CARD INSTALLATION DIMENSIONS
Ensure that there is enough space for the 6+2-pin power connectors

SETTING UP YOUR DEVICE

Gently pull the lever to unlock.
Pull out the compartment from the enclosure.
Peel off the tape and remove the protective foam.
Remove the PCI-E slot cover and thumbscrew.
Insert your compatible graphics card* to the PCI-E port.

*Not included

SETTING UP YOUR DEVICE - Step 6
information Push the release lever from the opposite side to eject the graphics card. Always push the release lever first before pulling out your graphics card

Re-insert the PCI-E thumbscrew.
Plug the 6+2-pin power connectors to your graphics card.
Push the compartment into the enclosure until completely shut.
Push the lever to lock the compartment.
Connect the Razer Core X to an outlet using the power cord.
Connect the Razer Core X to your Razer Blade Stealth using the Thunderbolt 3 (USB-C) cable.
Note: This connection will also provide power and charge your compatible USB-C powered laptop,
Connect the Razer Core X to your external monitor using the display port of your installed graphics card.
Toggle the power switch on.

information A SYSTEM UPDATE MAY BE REQUIRED
Your compatible Razer Blade Stealth or Razer Blade may require a software update for Razer Core X to function properly. Please check the following website to ensure your system has the latest software installed: rzr.to/core-update

Configure the necessary system settings for your Razer Core X:

For Windows users
Once the Razer Core X is powered on and connected to your system, the Thunderbolt software window will pop up. Simply set all listed Razer Core X to Always Connect and click OK. These settings can also be accessed from the Thunderbolt software in the system tray if the pop-up window does not display.
SETTING UP YOUR DEVICE - Step 15

For Mac users
Your Razer Core X can already be used by supported applications upon connecting it to the Thunderbolt (USB-C) port of your Mac. For more information on how to use your external GPU configuration with your Mac, please visit support.apple.com/HT208544

IMPORTANT SAFETY INSTRUCTIONS

burn hazard
Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

To operate the computer safely and reduce the possibility of heat-related injuries, follow these guidelines:

Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support.
Do not attempt to service or fix the device yourself at any time.
Operate the device only within the specific temperature range of 0°C(32°F) to 40°C (104°F).Should the temperature exceed this range, unplug and switch off the device in order to let the temperature stabilize to an optimal level.
Ensure that the Razer Core X is on a stable work surface and does not hinder air circulation from around the computer.
Do not use or install near water or moisture. Do not use around swimming pools, bath tubs, or other wet surfaces.
Do not use or install near any heat or naked flame sources. Do not use around radiators, stoves, fire places, candles or other hot surfaces.
Power sources & voltage warning. This apparatus should only be operated from the type of power source indicated on the apparatus. If you are unsure of the power source in the location you intend to operate the apparatus, please consult the local power company or a qualified technician.
Do not block ventilation grills or openings. Install in accordance with manufacturer's instructions.
Unplug the apparatus before cleaning and do not use aerosol or liquid cleaning agents.
Never place anything over the power adapter when operating your apparatus. Do not place the apparatus on any unstable cart, stand, tripod or table. The apparatus may fall, causing injury to person and damage to property, including the product itself.
Unplug this apparatus during lightning storms or when unused for extended periods of time to further protect the apparatus.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, or the point where they exit from the apparatus.
Do not insert or push any objects into openings on the product.
Do not overload wall electricity outlets, extension cords and plugs. This may result in fire or electrical shock.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not attempt to service this apparatus yourself. Removing the covers will expose you to dangerous electric currents.
Do not take apart the device (doing so will void your 30-days warranty) and do not attempt to operate it under abnormal current loads.
Do not expose the device to liquids. Exposing the product to these conditions may result in an electric shock.
Do not expose the device to open flames such as stoves, candles, or fireplaces.
Dispose the product in accordance with your local environmental laws and guidelines.
Do not use the product if any cable is damaged or any wires are exposed. Doing so may result in an electric shock.
Use only the power cord provided with the product to avoid short-circuiting the system.
Do not tamper or abuse the product; including but not limited to dropping, shaking, crushing, excessive bending, puncturing, shredding, or inserting foreign objects into the device.
Do not expose the device to fine solid objects such as dust, dirt, and sand.
Avoid placing the product near devices that emit radio waves such as mobile phones, radio transmitters and Wi-Fi routers as it can be affected by their magnetic interference.