Cubitt Viva - Smartwatch Manual

Device Overview

Front

Back

Charging cable

Steps for Use

You can follow these steps to use CUBITT VIVA Watch:

The following steps will take approximately 5 to 10 minutes, please schedule a suitable time.

Wear Your Watch

For optimal data accuracy, please observe the following guidelines while wearing the watch:

1. Wear the watch at a position approximately two finger — widths from your wrist bone.
2. For comfort, adjust the band to allow a finger's width between it and your wrist. This ensures both Contact and fit.

Power On

Press the Digital Crown until the startup screen appears.

Note: If the watch can't power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically.

Set up the Watch

Step 1: Download the Cubitt Pro ap
Go to the app store on your phone, search for Cubitt Pro, and install it.

• For Android phones, go to the Google Play.
  
• For iPhone, go to the App Store.
  

You can also scan the QR code on the left to quickly go to the Cubitt Pro app in the app store, and install it.

Step 2: Pair with the App
Open the Cubitt Pro app and select " Set Up a Device" on the home page. Follow the instructions to pair your "CUBITT VIVA Watch" via Bluetooth. Then you can start using the watch.

Attentions:

1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone's system settings.
2. To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone.

Get Started

Touchscreen Operation

Support full-screen touch (swipe, tap, touch and hold)

Swipe up
Swipe left
Swipe right
Swipe d own

Digital Crown Operation

Press

1. Press the digital crown to wake up the screen.
2. Press the digital crown to center to enter the app center from the watch face screen.
3. Exit the app

Long press for 8 seconds to force restarting the watch.

Rotate

1. Toggle between screens or navigate through menus.
2. Adjust the volume ot prompt torus and phone calls.
   

Common Functions

Notification Center
Swipe down on the watch face screen.

Control Center
To access the Control Center, swipe up on the watch face screen/ Enable features like Silent Mode, Sleep Mode, Always-on Display, and adjust brightness and volume swiftly.

Tiles
To switch quickly between the Activity, Heart Rate, Sleep, Recently, Weather or Workout tiles, swipe left or right on the watch face screen.

Change the Watch Face
To change the watch face, press and hold the screen for 1 second to access the watch face gallery.

Record Workouts
To start your workout recording, access the Workout app and select a specific workout.

To obtain your exercise trajectory and other data when engaging in outdoor activities, you need to connect the Fitbeing App while your smartwatch is in outdoor mode.

Health Metrics Measurement
When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application.

Install New Watch Faces

In the Cubitt Pro app, navigate to the Face Gallery page to pick up your preferred watch face.

Charge the Watch

To charge the watch, connect the charging cable to a USB source. Attach the other end to the charging contact on the back ot the watch. The watch will display a charging icon while it is being charged.

Note:

• Make sure the USB charging plug Is at the same side as the crown.
• Ensure to use a standard USB power source with an output of 5V 1A cor above.
• Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture.

Change the Band

Rem band

1. Lift the spring bar from the groove.
2. Bush and bold spring bar.
3. Pull it out gently to remove the band.
   

Install band

1. Insert the metal pin at position "A" in the hole.
   
2. Push and hold the spring bar.
3. Press the band into the body and release the spring bar.
4. Pull the watch band to confirm the firm installation.

Wear and Care

• It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist.
• To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band.

Design for Comfortable Wearing

The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear.

Key Specifications

Help and Guide

Frequently Asked Questions
If you encounter any problems while using the product, you can access the "Profile — Help" section in the Cubitt Pro app for assistance.

Scan the QR code on the right to access for assistance.

Precautions

• Do not replace the built-in battery yourself as it may pose a safety risk.
• Avoid forcibly opening the watch case, as it may cause short circuits and overheating.
• Keep the watch away from environments exceeding 60°C to prevent battery leakage or explosion.
• While the product complies with IP68 waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow.
  Note that the waterproof performance may be compromised if the product structure is damaged.
• Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product's upgrade instructions.

cubittofficial.com

@cubitt

Documents / Resources

References

• Google Play
• App Store - Apple
• Cubitt Smartwatches | Online Shop

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Cubitt Viva - Smartwatch Manual